LEDs and and power semiconductors. The company asserts that its large diameter wafers allow the industry to fabricate power semiconductors and LEDs using existing, standard semiconductor production sites, thereby cutting costs. According to the company, its performance data on 150mm wafers is “already unique” and it will now extend its lead to 200mm substrates.
Vice President Operations of AZZURRO, commented, “Our technology provides high-quality, crack-free GaN layers on 150mm standard silicon wafers with very good crystal quality and extremely low bow values. We chose Veeco’s K465i to produce these high efficiency GaN-on-Si stacks because of its performance, process stability, and high throughput. We believe our GaN-on-Si technology will trigger a new wave of highly efficient and cost-optimized components for the LED and power semiconductor industry.”
Jeff Hawthorne, Veeco’s Senior Vice President, MOCVD, commented, “The power electronics device market is forecasted by Yole Développement to be $25B by 2015, and GaN has the ability to make devices with higher efficiency and switching speed than traditional Si devices. Further, LEDs made with GaN-on-Si technology will enable lower LED costs. We anticipate that the demand for MOCVD tools for these GaN-on-Si applications will grow as technology moves from R&D into production. Veeco’s K465i systems offer key advantages for GaN-on-Si production, including low particle count and excellent yields, and we’re looking forward to continuing to support AZZURRO’s growing GaN-on-Si business.”
Total operating profit margin was 16.7% for the second quarter of 2012, an increase from 15.8% in the same period last year. During the quarter, the Company recognized $10.7 million of expense relating to the previously announced Eaton Corporation (NYSE: ETN) transaction and certain legacy environmental issues, primarily offset by a $9.1 million gain from the sale of the Envirotemp FR3 fluid business and brand. Excluding the effect of these items, total operating profit margin was 16.8% for the second quarter of 2012, up from 15.8% in the same period last year.
2015年12月31日星期四
2015年12月29日星期二
The LED industry subsidy program was restarted
Early in February, China launched a program to subsidize the LED industry for products including indoor downlight LEDs, reflective self-ballasted lamps, outdoor LED streetlights, and tunnel lamps. However, due to the quotes prices from some companies were considered unreasonable, the program was halted.
And in May, China launched new policy to promote energy-saving lighting and LED lighting, and 2.2 billion was arranged for new subsidies, the LED industry subsidy program was restarted.
Bidding companies' are required to have a capacity of at least 200 thousand pieces in downlight series and reflective self-ballasted lamp, or 30 thousand pieces in streetlight and tunnel light series , with minimum registered capital of 50 million Yuan. The subsidies would be deducted from the contract price negotiated by bid winners and government, so consumers would directly benefit from the program.
NDRC (National Development and Reform Commission) has shown that China subsidized energy-saving lighting with 280 million Yuan in 2008, rallying 650 million Yuan in market demand.
And in May, China launched new policy to promote energy-saving lighting and LED lighting, and 2.2 billion was arranged for new subsidies, the LED industry subsidy program was restarted.
Bidding companies' are required to have a capacity of at least 200 thousand pieces in downlight series and reflective self-ballasted lamp, or 30 thousand pieces in streetlight and tunnel light series , with minimum registered capital of 50 million Yuan. The subsidies would be deducted from the contract price negotiated by bid winners and government, so consumers would directly benefit from the program.
NDRC (National Development and Reform Commission) has shown that China subsidized energy-saving lighting with 280 million Yuan in 2008, rallying 650 million Yuan in market demand.
2015年12月28日星期一
the venture supplies LED lighting and service
The new venture, headquartered in Nanyan, Henan Province, will seek partners in all of the mainland’s provinces to drum up LED streetlight business, pointed out by the group.
GCL-Poly is listed on Hong Kong Stock Exchange, reporting net income of HK$4.2 billion (US$555 million at US$1: HK$7.7) on revenue of HK$25.5 billion (US$3.3 billion) in 2011. Before the cooperation in LED venture, the company has partnered with Hon Hai in clean-energy business.
Hon Hai pointed out that although GCL-Poly is a major strategic partner of it, the mainland Chinese manufacturer will not hold shares in the LED venture. Their cooperation will be based on the model that GCL-Poly bids for streetlight contracts while the venture supplies LED lighting and service. They share profits.
The two companies hope that the cooperation will maximize their share of the mainland’s clean-energy market by combining their respective specialties.
Acuity Brands Lighting Vice President for Education Solutions
Dr. Frank Wischmeyer, Vice President and Program Manager Power Electronics at AIXTRON SE, adds: “We are very pleased to announce this new order from one of Europe’s newest and most promising start-ups. AIXTRON is pleased to partner with EpiGaN as they advance equipment, processes and materials for larger area GaN-on-Silicon wafers.”
Incorporated in 2010, EpiGaN is providing device manufacturers with access to a unique, proven technology addressing market segments such as power supplies for consumer electronics, hybrid electric vehicles, solar inverters, RF power for base stations, smart grid, etc. The company is also participating in the EU project HiPoSwitch which will develop more compact and more powerful energy converters.
Acuity Brands is proud to continue to be a flagship sponsor to help create schoolhouses in Arizona,” said Tim Hogan, Acuity Brands Lighting Vice President for Education Solutions. “Our Smart + Simple Solutions integrate electric lighting, daylighting, and controls to both improve the learning environment and help reduce the overall long-term cost of the structure.”
Incorporated in 2010, EpiGaN is providing device manufacturers with access to a unique, proven technology addressing market segments such as power supplies for consumer electronics, hybrid electric vehicles, solar inverters, RF power for base stations, smart grid, etc. The company is also participating in the EU project HiPoSwitch which will develop more compact and more powerful energy converters.
Acuity Brands is proud to continue to be a flagship sponsor to help create schoolhouses in Arizona,” said Tim Hogan, Acuity Brands Lighting Vice President for Education Solutions. “Our Smart + Simple Solutions integrate electric lighting, daylighting, and controls to both improve the learning environment and help reduce the overall long-term cost of the structure.”
2015年12月23日星期三
the change is saving us money and energy at the same time
Training seminar attendees explore multiple daylighting, electric lighting and controls solutions from Acuity Brands that focus on performance and energy savings. Coursework showcases daylighting solutions for suspended-ceiling applications, including applications in classrooms, offices and manufacturing spaces.
When consumers walk into their neighborhood Walgreens (NYSE, NASDAQ: WAG) store, they may notice a difference as they walk down the aisles. Nail polish on cosmetic shelves may appear more vibrant and magazine covers may be easier to read. GE Lighting helped Walgreens recently upgrade its general lighting across 80 percent of its nationwide locations. The change is subtle, but noticeable to customers and to Walgreens' energy budget.
"Creating the very best shopping experience for our customers is our top priority, and lighting helps us achieve that goal," said Tim Schmid, divisional vice president of facilities management, energy and sustainability with Walgreens. "With our new lighting upgrade, colors appear more vibrant and more like they would in daylight, so customers don't need to second guess themselves in the cosmetics aisle. Plus, the change is saving us money and energy at the same time."
Walgreens new lighting initiative meant installing lamps with a higher color temperature and color rendering index (CRI), causing tones to appear more vivid and vibrant. Because different types of light produce different color temperatures, lighting can affect how shoppers perceive the colors of different products. Color accuracy at a store widely known for its cosmetics selection is critical.
When consumers walk into their neighborhood Walgreens (NYSE, NASDAQ: WAG) store, they may notice a difference as they walk down the aisles. Nail polish on cosmetic shelves may appear more vibrant and magazine covers may be easier to read. GE Lighting helped Walgreens recently upgrade its general lighting across 80 percent of its nationwide locations. The change is subtle, but noticeable to customers and to Walgreens' energy budget.
"Creating the very best shopping experience for our customers is our top priority, and lighting helps us achieve that goal," said Tim Schmid, divisional vice president of facilities management, energy and sustainability with Walgreens. "With our new lighting upgrade, colors appear more vibrant and more like they would in daylight, so customers don't need to second guess themselves in the cosmetics aisle. Plus, the change is saving us money and energy at the same time."
Walgreens new lighting initiative meant installing lamps with a higher color temperature and color rendering index (CRI), causing tones to appear more vivid and vibrant. Because different types of light produce different color temperatures, lighting can affect how shoppers perceive the colors of different products. Color accuracy at a store widely known for its cosmetics selection is critical.
2015年12月22日星期二
Warm White panels providing clean useful light to ballpark employees in the backrooms
PolyBrite replaced the severely outdated T12 U-Bend Fluorescent tubes, which consume 78 Watts per fixture, with Borealis 2 x 2 LED Flat Panels, which consume only 50 Watts per fixture. The modern Borealis LED Panels were seamlessly installed, with the Cool White producing a clean white light to enhance true colors in the concourses, and Warm White panels providing clean useful light to ballpark employees in the backrooms and workstations.
“The pleasing light of the Borealis panels instantly enhance the aesthetics and provide even light eliminating glare and shadows,” said Carl Scianna, President and CEO of PolyBrite International. Mr. Scianna further noted that “Borealis LED Panels provide excellent visibility and color rendering for the workers and sport enthusiasts ordering fare, while delivering major energy and maintenance savings for the ballpark! We are proud to be part of the Illinois Sports Facilities Authority green initiatives for U.S. Cellular Field.”
Borealis LED panel lighting is designed to replace traditional, power demanding fluorescent and incandescent lights in standard drop ceiling and surface mount fixtures. A highly reflective diffusion lens produces a soft, consistent light, effectively illuminating surfaces and ensures uniform and optimal light distribution without glare or pixilation. Borealis LED panels sharply reduce energy consumption and are fully interchangeable panels that are simple to install and effectively eliminate maintenance costs associated with replacing traditional bulbs or faulty ballasts. Unlike traditional fluorescent lights, the Borealis panels contain no mercury or hazardous gases, and completely eliminate disposal and recycling costs. The Borealis Panels are dimmable, meet NEMA codes, are UL listed, and include Lighting Facts verified product.
“The pleasing light of the Borealis panels instantly enhance the aesthetics and provide even light eliminating glare and shadows,” said Carl Scianna, President and CEO of PolyBrite International. Mr. Scianna further noted that “Borealis LED Panels provide excellent visibility and color rendering for the workers and sport enthusiasts ordering fare, while delivering major energy and maintenance savings for the ballpark! We are proud to be part of the Illinois Sports Facilities Authority green initiatives for U.S. Cellular Field.”
Borealis LED panel lighting is designed to replace traditional, power demanding fluorescent and incandescent lights in standard drop ceiling and surface mount fixtures. A highly reflective diffusion lens produces a soft, consistent light, effectively illuminating surfaces and ensures uniform and optimal light distribution without glare or pixilation. Borealis LED panels sharply reduce energy consumption and are fully interchangeable panels that are simple to install and effectively eliminate maintenance costs associated with replacing traditional bulbs or faulty ballasts. Unlike traditional fluorescent lights, the Borealis panels contain no mercury or hazardous gases, and completely eliminate disposal and recycling costs. The Borealis Panels are dimmable, meet NEMA codes, are UL listed, and include Lighting Facts verified product.
2015年12月21日星期一
the conventional LED based on equivalent die surface area
The study compared the environmental impacts associated with a CFL, an incandescent lamp, a 2012 Philips Endural LED and a 2017 LED (anticipating improvements in manufacturing, performance and driver electronics), by preparing “spider graphs”, with the impact of each lamp plotted on the graph. Lights with the least impact have their circle close to the center and lights with the greatest impact will be on the outer edges of the web.
According to the company, the unique patented technology rights have been under development by Seoul Semiconductor for over 10 years. The brightness has been dramatically improved by 5 times over the conventional LED based on equivalent die surface area. The company expects further improvements will increase this to more than 10 times existing LEDs.
Currently, the brightness of a power chip LED in mass production is around 100 lumens in warm white but this new product produces 500 lumens which is 5 times better. As an example, when making a LED bulb for a 60W household bulb replacement, generally, 10-20 LED packages are used, but when this new product is applied, the same brightness can be achieved with only 1-2 packages.
As exclusive partner, Technolite has been supplying Lumenpulse's range of LED lighting fixtures to the Singapore market since 2011. Technolite also offers technical and commercial assistance ensuring that architects, designers and engineers are actively supported.The move to expand the relationship will ensure the Lumenpulse brand and portfolio is strongly represented throughout South East Asia.
According to the company, the unique patented technology rights have been under development by Seoul Semiconductor for over 10 years. The brightness has been dramatically improved by 5 times over the conventional LED based on equivalent die surface area. The company expects further improvements will increase this to more than 10 times existing LEDs.
Currently, the brightness of a power chip LED in mass production is around 100 lumens in warm white but this new product produces 500 lumens which is 5 times better. As an example, when making a LED bulb for a 60W household bulb replacement, generally, 10-20 LED packages are used, but when this new product is applied, the same brightness can be achieved with only 1-2 packages.
As exclusive partner, Technolite has been supplying Lumenpulse's range of LED lighting fixtures to the Singapore market since 2011. Technolite also offers technical and commercial assistance ensuring that architects, designers and engineers are actively supported.The move to expand the relationship will ensure the Lumenpulse brand and portfolio is strongly represented throughout South East Asia.
2015年12月18日星期五
we have to be involved today to help create the car of tomorrow
Each Dialight LED fixture is available in either cool white or neutral white color temperature and comes standard with a ruggedized, durable housing and shatter-proof lens that is highly resistant to shock and vibration. Designed for fast and easy retrofit from existing conventional lighting solutions, Dialight products run on a universal 100-277V power supply and are compatible with a wide variety of mounting options and accessories. Each fixture is backed by Dialight’s standard five-year, full-performance warranty for worry-free operation, even in the harshest conditions, including off-shore platforms, frigid temperatures and both tropical and arid conditions.
Temperature stability is the biggest challenge when it comes to making these innovative surface area light sources suitable for use in cars. "Since the success of this research we’re now tackling their future application in production vehicles", says Ulrich Eisele, responsible for the OLED business segment at Osram. "As the automotive industry plans and develops its future designs a long time in advance, we have to be involved today to help create the car of tomorrow."
Light is becoming an increasingly important factor for automotive design. While, up until a few years ago, manufacturers stressed the importance of a car’s shape more than anything, these days almost every make has its own distinctive “light face” – brought about by the aid of LEDs. Already, every second new car is equipped with Osram LEDs. To initiate further unique “bright” selling points, experts anticipate that in addition to point light source LED the related OLED technology will become an integral part in cars. OLEDs are surface light sources. The vast majority of lighting applications in cars requires surface light – especially lighting applications which serve visibility in road traffic such as indicators, rear lights or interior lighting. Osram has already come up with specific designs in collaboration with UnternehmerTUM, the center for innovation and business creation at the Technische Universit?t München.
The biggest challenge in developing organic light-emitting diodes for automotive applications is temperature stability. So as to be suitable for use in cars, OLEDs have to meet manufacturer specifications. In rear lights, for example, they must withstand temperature peaks of up to 85 degrees Celsius or even higher. When the first OLED products for lighting applications were introduced almost three years ago, they were temperature-resistant for no more than two to three hours. With its record-breaking OLED Osram has outdone this temperature resistance by a factor of a hundred. A further tenfold increase will make the first applications in automobiles viable. The current development is targeted in such a direction as anticipates this increase within the next few years. As cars are developed several years in advance, OLED elements may therefore be included in plans for the next automotive generations.
According to Epistar’s chairman B.J Lee, the company will invest NT$ 5 billion (US$ 166.7 Million) in expanding production, making it become one of the top two LED epitaxy manufacturers in the world, next only to Nichia.
Temperature stability is the biggest challenge when it comes to making these innovative surface area light sources suitable for use in cars. "Since the success of this research we’re now tackling their future application in production vehicles", says Ulrich Eisele, responsible for the OLED business segment at Osram. "As the automotive industry plans and develops its future designs a long time in advance, we have to be involved today to help create the car of tomorrow."
Light is becoming an increasingly important factor for automotive design. While, up until a few years ago, manufacturers stressed the importance of a car’s shape more than anything, these days almost every make has its own distinctive “light face” – brought about by the aid of LEDs. Already, every second new car is equipped with Osram LEDs. To initiate further unique “bright” selling points, experts anticipate that in addition to point light source LED the related OLED technology will become an integral part in cars. OLEDs are surface light sources. The vast majority of lighting applications in cars requires surface light – especially lighting applications which serve visibility in road traffic such as indicators, rear lights or interior lighting. Osram has already come up with specific designs in collaboration with UnternehmerTUM, the center for innovation and business creation at the Technische Universit?t München.
The biggest challenge in developing organic light-emitting diodes for automotive applications is temperature stability. So as to be suitable for use in cars, OLEDs have to meet manufacturer specifications. In rear lights, for example, they must withstand temperature peaks of up to 85 degrees Celsius or even higher. When the first OLED products for lighting applications were introduced almost three years ago, they were temperature-resistant for no more than two to three hours. With its record-breaking OLED Osram has outdone this temperature resistance by a factor of a hundred. A further tenfold increase will make the first applications in automobiles viable. The current development is targeted in such a direction as anticipates this increase within the next few years. As cars are developed several years in advance, OLED elements may therefore be included in plans for the next automotive generations.
According to Epistar’s chairman B.J Lee, the company will invest NT$ 5 billion (US$ 166.7 Million) in expanding production, making it become one of the top two LED epitaxy manufacturers in the world, next only to Nichia.
buoyed by continued economic growth and infrastructure expansion
According to industry executives, 60 watt incandescent bulb occupies a major position in the traditional light source market, and currently the illumination of 8 W LED bulb cannot compare with it. However, 9W and 10W LED bulb can achieve the equal illumination of the incandescent bulb. Therefore, it will create potential market value.
Kelington Group Bhd (KGB), which dedicated in ultra-high purity gas and chemical infrastructure, has targeted to China's LED market.
According to Group president and chief operating officer Ong Weng Leong, the company already had LED jobs in China but expected to capitalise further on the growth prospects there. Meanwhile the company had also done jobs for companies in Malaysia, but felt that the prospects were no where near as great as China.
According to reports, Chinese lighting market reached US$12.2bil (RM39bil) in 2010, accounting for 15.4% of the global market share, buoyed by continued economic growth and infrastructure expansion. And the Chinese lighting market share can is expected to rise to 18.3% in 2015, with the total Chinese market value reaching US$20bil.
Kelington Group Bhd (KGB), which dedicated in ultra-high purity gas and chemical infrastructure, has targeted to China's LED market.
According to Group president and chief operating officer Ong Weng Leong, the company already had LED jobs in China but expected to capitalise further on the growth prospects there. Meanwhile the company had also done jobs for companies in Malaysia, but felt that the prospects were no where near as great as China.
According to reports, Chinese lighting market reached US$12.2bil (RM39bil) in 2010, accounting for 15.4% of the global market share, buoyed by continued economic growth and infrastructure expansion. And the Chinese lighting market share can is expected to rise to 18.3% in 2015, with the total Chinese market value reaching US$20bil.
2015年12月16日星期三
LED technology development and demonstration projects of trial LED lights
The three agreements address co-setting technical norm and standard for LED lighting, cooperation on LED technology development and demonstration projects of trial LED lights, and assessment and demonstration of LED high bay light application projects in Shanxi Province and Harbin City.
According to Wu Ling, the Secretary General of China Solid State Lighting Alliance, after signing the memorandums the mainland and Taiwan can work together to tap world LED lighting market by forming synergy alliance, in which Taiwan is versed in upstream technology and the mainland is good at midstream and downstream manufacturing.
And a participating official of the mainland’s National Development and Reform Commission, disclosed that the mainland will begin on July 1 this year to prohibit imports, production and sale of high-power incandescent bulbs in the mainland, with the ban on low-power incandescent bulbs to be in force later. Assessments on the practice will be made in 2015 to provide the grounds for phasing out the bulbs rated above 15 watts beginning on Oct. 1 2016.
Additionally, the mainland’s Ministry of Finance this year alone will spend RMB2.2 billion to replace one million traditional streetlights and tunnel lights as well as 10 million spotlights and recessed downlights with Led linear high bay light at airports, hospitals, schools, harbors, train stations, state-run mining companies, and on roads.
According to Wu Ling, the Secretary General of China Solid State Lighting Alliance, after signing the memorandums the mainland and Taiwan can work together to tap world LED lighting market by forming synergy alliance, in which Taiwan is versed in upstream technology and the mainland is good at midstream and downstream manufacturing.
And a participating official of the mainland’s National Development and Reform Commission, disclosed that the mainland will begin on July 1 this year to prohibit imports, production and sale of high-power incandescent bulbs in the mainland, with the ban on low-power incandescent bulbs to be in force later. Assessments on the practice will be made in 2015 to provide the grounds for phasing out the bulbs rated above 15 watts beginning on Oct. 1 2016.
Additionally, the mainland’s Ministry of Finance this year alone will spend RMB2.2 billion to replace one million traditional streetlights and tunnel lights as well as 10 million spotlights and recessed downlights with Led linear high bay light at airports, hospitals, schools, harbors, train stations, state-run mining companies, and on roads.
2015年12月15日星期二
package color provides high contrast ratio for superior image definition
DOE’s recent report has estimated that switching to LED lighting over the next two decades could save the country $250 billion in energy costs over that period, reduce the electricity consumption for lighting by nearly one half, and avoid 1.8 billion metric tons of carbon emission.
According to Kenneth Ames, CEO of Seesmart ,"LED lighting is an effective and efficient solution for a wide range of lighting applications. Seesmart's new line of exterior LED lighting products is necessary to continue delivering our customers solutions. By insourcing the line's manufacturing requirements back to the U.S., Seesmart is working to expand America's manufacturing footprint in forward-thinking and environmentally friendly product categories.
Under Nichia part number "NSSM032", this product is a surface mount device for all weather applications. Waterproof and silicone potted, NSSM032 is easily integrated by user due to the thicker package size and lower position of leads. Plus, the black external package color provides high contrast ratio for superior image definition.
Nichia says that a higher level of outdoor screen image quality can be realized with NSSM032 even when viewed from wide angle or when long viewing distances are required for outdoor displays such as sporting arenas, advertisement billboards and retail displays. And currently, the new samples are now available for evaluation.
According to Kenneth Ames, CEO of Seesmart ,"LED lighting is an effective and efficient solution for a wide range of lighting applications. Seesmart's new line of exterior LED lighting products is necessary to continue delivering our customers solutions. By insourcing the line's manufacturing requirements back to the U.S., Seesmart is working to expand America's manufacturing footprint in forward-thinking and environmentally friendly product categories.
Under Nichia part number "NSSM032", this product is a surface mount device for all weather applications. Waterproof and silicone potted, NSSM032 is easily integrated by user due to the thicker package size and lower position of leads. Plus, the black external package color provides high contrast ratio for superior image definition.
Nichia says that a higher level of outdoor screen image quality can be realized with NSSM032 even when viewed from wide angle or when long viewing distances are required for outdoor displays such as sporting arenas, advertisement billboards and retail displays. And currently, the new samples are now available for evaluation.
2015年12月14日星期一
With momentum from LED lighting launched in the second quarter
Shipments of LED lighting has enabled the company to score sales of NT$630 million in May, up 9% from a month ago or 15.7% from a year earlier, to finish the first five months of this year with aggregate revenue of LED high bay light, an 8.95% increase from the same period of 2011.
With momentum from LED lighting launched in the second quarter, the company confidently expects annual revenue for this year to cap that of 2011, with annual sales of LED bulbs to quadruple to exceed 500,000 units from some 100,000 units.
GlacialLight will also be featuring their newly released LED flood light series using Philips Lumileds LED chips, Arcturus GL-Baylight series, Pollux series LED panel lights, and Capella series down lights. GlacialLight will also be displaying a number of other LED lighting solutions including: LEDs with dimming functionality, high bay lights, lamp lights, LED tubes as well as flood light solutions.
LED Lighting Taiwan 2012 – the 8th International LED Lighting Exposition will be an ideal venue to meet, and do face-to-face bu
Pyro 400 is LayTec’s in-situ solution for precise measurement of GaN real surface temperature during epitaxial growth process. This Led linear high bay light pyrometry tool provides a new quality of temperature control with an unrivalled accuracy and is of huge benefit in GaN based LED and laser production because it directly correlates with the final devices emission wavelength.
With momentum from LED lighting launched in the second quarter, the company confidently expects annual revenue for this year to cap that of 2011, with annual sales of LED bulbs to quadruple to exceed 500,000 units from some 100,000 units.
GlacialLight will also be featuring their newly released LED flood light series using Philips Lumileds LED chips, Arcturus GL-Baylight series, Pollux series LED panel lights, and Capella series down lights. GlacialLight will also be displaying a number of other LED lighting solutions including: LEDs with dimming functionality, high bay lights, lamp lights, LED tubes as well as flood light solutions.
LED Lighting Taiwan 2012 – the 8th International LED Lighting Exposition will be an ideal venue to meet, and do face-to-face bu
Pyro 400 is LayTec’s in-situ solution for precise measurement of GaN real surface temperature during epitaxial growth process. This Led linear high bay light pyrometry tool provides a new quality of temperature control with an unrivalled accuracy and is of huge benefit in GaN based LED and laser production because it directly correlates with the final devices emission wavelength.
2015年12月8日星期二
support the work of our Optical Performance Centre
There will be over 95 exhibitors at euroLED 2012. In addition to Philips, the event is also sponsored by Arrow Electronics, PurEcoLED, global accreditation specialist Underwriters Laboratories (UL), and media company Total Lighting.
euroLED is widely recognised as Europe’s leading showcase event for the lighting industry. Once again this year, Birmingham Science Park is partnering with experienced international conference organisers Smithers Apex to deliver the technical conference.
Michelle Cleaver, Birmingham Science Park’s Head of euroLED said: “euroLED is now in its ninth year and the high-growth nature of the lighting industry ensures the event grows in size year on year. By holding kicker events throughout the year, we have been able to really get to the heart of what our visitors, exhibitors, sponsors and conference delegates require, and our decision to move the event to Birmingham’s NEC has been widely supported.
“The reason why euro LED is so important to Birmingham Science Park is to promote and support the work of our Optical Performance Centre, which has an international reputation for research, testing and accreditation. Many new millionaires are expected to be created from SME lighting companies by 2016, and our team is doing everything it can to nurture these innovative businesses and seek to create some lighting millionaires here on home soil.”
euroLED is widely recognised as Europe’s leading showcase event for the lighting industry. Once again this year, Birmingham Science Park is partnering with experienced international conference organisers Smithers Apex to deliver the technical conference.
Michelle Cleaver, Birmingham Science Park’s Head of euroLED said: “euroLED is now in its ninth year and the high-growth nature of the lighting industry ensures the event grows in size year on year. By holding kicker events throughout the year, we have been able to really get to the heart of what our visitors, exhibitors, sponsors and conference delegates require, and our decision to move the event to Birmingham’s NEC has been widely supported.
“The reason why euro LED is so important to Birmingham Science Park is to promote and support the work of our Optical Performance Centre, which has an international reputation for research, testing and accreditation. Many new millionaires are expected to be created from SME lighting companies by 2016, and our team is doing everything it can to nurture these innovative businesses and seek to create some lighting millionaires here on home soil.”
2015年12月3日星期四
approved energy savings design for these contracts and is now procuring the materials
The new projects include retrofits to upgrade the lighting of a Fortune 500 manufacturing facility as well as lighting retrofits at several locations of a large hospital complex located in the high bay light.Included also were lighting retrofits at a school district in the Northeast as well as a community college and state building complex in the Midwest.Energy Focus has completed the audit of the facilities, inventoried their lighting systems, created an approved energy savings design for these contracts and is now procuring the materials and overseeing the lighting installations.
The Imtra LED ERL is designed for quick and easy surface-mount installation and offers the flexibility of either rear or side cable hook-up. The unit is housed in a streamline, UV stable white FRP housing that protrudes a mere 2-inches from the ceiling. Watertight PG7 cable glands are provided for surface-mount wiring and two terminal blocks are electrically connected for fixture-to-fixture “daisy-chain” connection. Emitting no radiated heat, Imtra LED ERL’s do not raise the ambient temperature, therefore providing more comfortable conditions, even in confined workspaces. The fixture’s efficient LED optical and driver design allow for maximum light enjoyment with minimal impact on a vessel’s DC batteries when not charging.
The Imtra LED ERL’s attractive, low-profile design complements well-kept engine spaces, provides a fresh look for otherwise dull utility areas and contains features that broaden its appeal for use in other areas of a vessel. The new LED fixture is designed for simple installation in a variety of situations including wall or ceiling mounting, rear or surface-mount cabling, and interior or exterior locations. Easy access, integrated terminal blocks provide secure wire connections without the need for special connectors or shrink-tubing. Waterproof to level LED high bay light (ingress protection), the Imtra LED ERL can be hosed down without concern of water entry. The fixture features an attractive yet robust FRP housing and impact resistant PC lens containing convenient captive secure screws that will not fall out when installing overhead.
The Imtra LED ERL is designed for quick and easy surface-mount installation and offers the flexibility of either rear or side cable hook-up. The unit is housed in a streamline, UV stable white FRP housing that protrudes a mere 2-inches from the ceiling. Watertight PG7 cable glands are provided for surface-mount wiring and two terminal blocks are electrically connected for fixture-to-fixture “daisy-chain” connection. Emitting no radiated heat, Imtra LED ERL’s do not raise the ambient temperature, therefore providing more comfortable conditions, even in confined workspaces. The fixture’s efficient LED optical and driver design allow for maximum light enjoyment with minimal impact on a vessel’s DC batteries when not charging.
The Imtra LED ERL’s attractive, low-profile design complements well-kept engine spaces, provides a fresh look for otherwise dull utility areas and contains features that broaden its appeal for use in other areas of a vessel. The new LED fixture is designed for simple installation in a variety of situations including wall or ceiling mounting, rear or surface-mount cabling, and interior or exterior locations. Easy access, integrated terminal blocks provide secure wire connections without the need for special connectors or shrink-tubing. Waterproof to level LED high bay light (ingress protection), the Imtra LED ERL can be hosed down without concern of water entry. The fixture features an attractive yet robust FRP housing and impact resistant PC lens containing convenient captive secure screws that will not fall out when installing overhead.
2015年12月1日星期二
the Chinese LED industry and global LED market
The LED Lighting Evolution Conference: From Sapphire to Lumens, on Wednesday, June 6, 2012 in Boston, Massachusetts. The conference, hosted by IMS Research, provides global light emitting LED high bay light leaders throughout the supply chain an opportunity to explore cutting edge innovations that shape the future of lighting.
The LEDforum 2012, on Monday, June 11, 2012 in Guangzhou, China. The conference, organized by LEDInside and Guangzhou International Lighting Exhibition, will focus on future prospects for the LED industry, address key developments in LED manufacturing process and equipment and provide a thorough analysis on the Chinese LED industry and global LED market.
Veeco’s Jia Lee, Ph.D., Senior Director of Marketing and Business Development for MOCVD, will participate in both conferences. Mr. Lee has held a variety of marketing positions covering the solar, foundries and semiconductor capital equipment industries. His presentation, “Enabling Solid State Lighting through Advancements in MOCVD Technology”, will provide an LED market outlook with emphasis on improving manufacturers’ production processes while reducing costs significantly.
Veeco is the world’s leading MOCVD equipment provider to the LED industry. According to IMS Research, the single-reactor TurboDisc? K465i?, introduced in 2010, was the top selling high bay light tool that year, and the TurboDisc MaxBright? Multi-Reactor GaN MOCVD System, launched in 2011, was the top seller last year. All of Veeco’s MOCVD systems provide the industry’s highest production and lowest cost of ownership and feature low maintenance TurboDisc technology, which enables highest system availability and throughput.
The LEDforum 2012, on Monday, June 11, 2012 in Guangzhou, China. The conference, organized by LEDInside and Guangzhou International Lighting Exhibition, will focus on future prospects for the LED industry, address key developments in LED manufacturing process and equipment and provide a thorough analysis on the Chinese LED industry and global LED market.
Veeco’s Jia Lee, Ph.D., Senior Director of Marketing and Business Development for MOCVD, will participate in both conferences. Mr. Lee has held a variety of marketing positions covering the solar, foundries and semiconductor capital equipment industries. His presentation, “Enabling Solid State Lighting through Advancements in MOCVD Technology”, will provide an LED market outlook with emphasis on improving manufacturers’ production processes while reducing costs significantly.
Veeco is the world’s leading MOCVD equipment provider to the LED industry. According to IMS Research, the single-reactor TurboDisc? K465i?, introduced in 2010, was the top selling high bay light tool that year, and the TurboDisc MaxBright? Multi-Reactor GaN MOCVD System, launched in 2011, was the top seller last year. All of Veeco’s MOCVD systems provide the industry’s highest production and lowest cost of ownership and feature low maintenance TurboDisc technology, which enables highest system availability and throughput.
the growing demand for products from its distribution networks
TüV Rheinland will issue Green product mark to the high bay light certified product, which can assist companies in demonstrating their corporate commitment and products’ international competitiveness to brands and retailers. In the other hand, the mark can give end consumers and buyers guidance in identifying green and sustainable products in the often crowded marketplace.
The proceeds from the new equity funding and commitments will be used to finance the Company's growth, expand its manufacturing capabilities, and enhance its leadership position in developing innovative energy-efficient LED lighting products for consumer and commercial applications in both the public and private sectors. This new round of funding will help the Company meet the growing demand for products from its distribution networks, including commercial networks (such as real estate owner/operators, retailers, and hospitality), public sector networks (such as the military and municipalities), and consumer networks (such as large-volume home improvement centers). Additionally, approximately $10 million will be used to retire a related-party obligation.
The funding was led by Riverwood Capital, a globally-focused private equity firm that invests in high-growth businesses in the technology and services industries. Pegasus Capital Advisors, L.P. and its affiliates, Lighting Science Group's majority owner, also participated in the equity financing in an amount equal to approximately $55 million, pursuant to an investment of approximately $33 million and an equity commitment of up to approximately $22 million.
Additionally, two executives who have previously worked with Riverwood Capital and some of its portfolio companies will be joining Lighting Science Group as senior managers--Brad Knight as Chief Operating Officer and Keith Scott as Chief Commercial Officer. Mr. Knight brings more than two decades of hands-on experience with international startups and turnarounds in a wide range of technology, product and service companies. He has held senior executive positions at Flextronics and Adaptix and currently serves as a Managing Director at Riverwood Solutions. Mr. Scott has served in both the role of CEO as well as sales and marketing executive in the energy, consumer electronics and contract manufacturing industries with companies such as Ultracell, Alien Technology and Flextronics.
According to the agreement, Focus will perform the LED high bay light project to sell LED lighting product account for 200 million Yuan. Aside from adopting the brand products which is designated by the customer, Focus will preferred to use the product made by Dongshan Precision among the same grade LED lamps.
The proceeds from the new equity funding and commitments will be used to finance the Company's growth, expand its manufacturing capabilities, and enhance its leadership position in developing innovative energy-efficient LED lighting products for consumer and commercial applications in both the public and private sectors. This new round of funding will help the Company meet the growing demand for products from its distribution networks, including commercial networks (such as real estate owner/operators, retailers, and hospitality), public sector networks (such as the military and municipalities), and consumer networks (such as large-volume home improvement centers). Additionally, approximately $10 million will be used to retire a related-party obligation.
The funding was led by Riverwood Capital, a globally-focused private equity firm that invests in high-growth businesses in the technology and services industries. Pegasus Capital Advisors, L.P. and its affiliates, Lighting Science Group's majority owner, also participated in the equity financing in an amount equal to approximately $55 million, pursuant to an investment of approximately $33 million and an equity commitment of up to approximately $22 million.
Additionally, two executives who have previously worked with Riverwood Capital and some of its portfolio companies will be joining Lighting Science Group as senior managers--Brad Knight as Chief Operating Officer and Keith Scott as Chief Commercial Officer. Mr. Knight brings more than two decades of hands-on experience with international startups and turnarounds in a wide range of technology, product and service companies. He has held senior executive positions at Flextronics and Adaptix and currently serves as a Managing Director at Riverwood Solutions. Mr. Scott has served in both the role of CEO as well as sales and marketing executive in the energy, consumer electronics and contract manufacturing industries with companies such as Ultracell, Alien Technology and Flextronics.
According to the agreement, Focus will perform the LED high bay light project to sell LED lighting product account for 200 million Yuan. Aside from adopting the brand products which is designated by the customer, Focus will preferred to use the product made by Dongshan Precision among the same grade LED lamps.
2015年11月30日星期一
They needed a solution which met their energy reduction targets but improved light levels
They needed a solution which met their energy reduction targets but improved light levels and created a sense of well-being for their car park users and we were able to provide it.”
According to the program, Hubbell Lighting will utilize its four different types of LED outdoor pedestrian lighting fixtures to replace 250 watt high-pressure sodium (HPS) lamped street lights known as cobra-heads, and 215 watt mercury-vapor pedestrian post-top fixtures along the sidewalks on the Hyatt Regency block of Main Street between Beattie Place and East North Street. The four types include Parkway Square, Cubic Indirect, Providence and Promenade.
All of the new LED lighting fixtures from Hubbell Lighting take advantage of the newest solid-state lighting technology and offer significantly improved energy efficiency (40-85%) over the old mercury-vapor and high-pressure sodium fixtures that were previously installed in the 1970s and 80s. The new fixtures also have a very long life expectancy (approximately 50,000 hours), which will bring an added benefit to the City in reduced maintenance costs.
Additionally, Hubbell Lighting deployed this energy-efficient technology over the center drive lanes of Main Street with its new Roadway RM LED cobra-head street lighting fixtures. The state-of-the-art optics feature 48 LEDs (68w) that deliver more visible and uniform light with an unprecedented 89 lumens per watt energy efficiency. The Roadway RM LED Series is also available as a retrofit kit (Roadway RF LED kit) for use in existing HPS cobra head fixtures from other lighting manufacturers. The Roadway RM LED Series can be specified with an optional photocell to help the City maximize its energy savings by automatically shutting the luminaire off during daylight hours without any additional programming or maintenance required. The installation of these streetlights provides the City of Greenville with a low maintenance, high efficiency LED solution that has more than four times the life of HPS with over 65% energy savings.
According to the program, Hubbell Lighting will utilize its four different types of LED outdoor pedestrian lighting fixtures to replace 250 watt high-pressure sodium (HPS) lamped street lights known as cobra-heads, and 215 watt mercury-vapor pedestrian post-top fixtures along the sidewalks on the Hyatt Regency block of Main Street between Beattie Place and East North Street. The four types include Parkway Square, Cubic Indirect, Providence and Promenade.
All of the new LED lighting fixtures from Hubbell Lighting take advantage of the newest solid-state lighting technology and offer significantly improved energy efficiency (40-85%) over the old mercury-vapor and high-pressure sodium fixtures that were previously installed in the 1970s and 80s. The new fixtures also have a very long life expectancy (approximately 50,000 hours), which will bring an added benefit to the City in reduced maintenance costs.
Additionally, Hubbell Lighting deployed this energy-efficient technology over the center drive lanes of Main Street with its new Roadway RM LED cobra-head street lighting fixtures. The state-of-the-art optics feature 48 LEDs (68w) that deliver more visible and uniform light with an unprecedented 89 lumens per watt energy efficiency. The Roadway RM LED Series is also available as a retrofit kit (Roadway RF LED kit) for use in existing HPS cobra head fixtures from other lighting manufacturers. The Roadway RM LED Series can be specified with an optional photocell to help the City maximize its energy savings by automatically shutting the luminaire off during daylight hours without any additional programming or maintenance required. The installation of these streetlights provides the City of Greenville with a low maintenance, high efficiency LED solution that has more than four times the life of HPS with over 65% energy savings.
2015年11月27日星期五
the design of the booth to feature our lighting solutions for hospitality
As a leader of lighting technology innovation and development, GE Lighting invents with the vigor of its founder Thomas Edison to develop energy-efficient solutions. The three GE incandescent bulbs in the time capsule unearthed at the 100th anniversary celebration of Nela Park, GE Lighting headquarters in the USA, are still able to be illuminated buried underground for a century. At the exhibition, we will showcase our comprehensive portfolio of vertical solutions in a 272-square-metre booth. Much thought had gone into the design of the booth to feature our lighting solutions for hospitality, retail, office and outdoor applications, while you can also experience GE Lighting historic milestone story, a reflection to Nela Park’s 100th Anniversary celebration initiatives.
On the site, visitors will also have the opportunity to participate in a series of tailor-made events. This year, the launch of two key LED new product at the show will definitely be worth a visit. Take the chance to peek at the new GE Lighting innovations in commercial and indoor lighting. Also, there will be couple of industry experts and the newly-elected Asia judge representative joining us at the GE Edison Award Re-launch Event to generate greater awareness for the award in Asia.
Concurrently, we will brought together an esteemed panel of speakers, as well as our in-house experts, to share their experiences in the respective fields throughout the vertical seminars, and to facilitate the exchange of ideas amongst industry members.
On the site, visitors will also have the opportunity to participate in a series of tailor-made events. This year, the launch of two key LED new product at the show will definitely be worth a visit. Take the chance to peek at the new GE Lighting innovations in commercial and indoor lighting. Also, there will be couple of industry experts and the newly-elected Asia judge representative joining us at the GE Edison Award Re-launch Event to generate greater awareness for the award in Asia.
Concurrently, we will brought together an esteemed panel of speakers, as well as our in-house experts, to share their experiences in the respective fields throughout the vertical seminars, and to facilitate the exchange of ideas amongst industry members.
2015年11月26日星期四
in addition to an ongoing royalty on gross revenues from the sales
In the meanwhile, PIDA pointed out that LED lighting will become a major momentum of the LED industry worldwide this year in light of climbing demands driven by energy-shortage issue.
on April 30th, Onteco Corporation has signed its first international license agreement with JARLYN S.A, a Uruguayan corporation, for its proprietary LED intellectual property ("IP"), developed by its subsidiary, NexPhase Lighting, Inc., dedicated in LED "intelligent" lighting development.
As compensation for the license, the Company is to receive a combination of $2.9 million dollars in common stock listed on the Frankfurt Stock Exchange plus a cash payment, in addition to an ongoing royalty on gross revenues from the sales and installations of lighting products using the Company's IP.
"Following completion of the JARLYN agreement, we have accelerated our serious negotiations with potential customer-manufacturers in several countries," Dror Svorai, President of the Company, stated, "Each license would be exclusive to a specific geographic area." He added, "We expect one or more of these licensing agreements to be closed in the next few months. Terms of each licensing agreement will be different, except each will be designed to generate an ongoing royalty stream of income for the Company."
on April 30th, Onteco Corporation has signed its first international license agreement with JARLYN S.A, a Uruguayan corporation, for its proprietary LED intellectual property ("IP"), developed by its subsidiary, NexPhase Lighting, Inc., dedicated in LED "intelligent" lighting development.
As compensation for the license, the Company is to receive a combination of $2.9 million dollars in common stock listed on the Frankfurt Stock Exchange plus a cash payment, in addition to an ongoing royalty on gross revenues from the sales and installations of lighting products using the Company's IP.
"Following completion of the JARLYN agreement, we have accelerated our serious negotiations with potential customer-manufacturers in several countries," Dror Svorai, President of the Company, stated, "Each license would be exclusive to a specific geographic area." He added, "We expect one or more of these licensing agreements to be closed in the next few months. Terms of each licensing agreement will be different, except each will be designed to generate an ongoing royalty stream of income for the Company."
2015年11月23日星期一
The Lumentalk technology turns existing electrical wiring into a stable
A crime lab requires very specialized lighting,” said Allen Hamm, Assistant Director of the JCCL. “The Lusio LED fixtures deliver high footcandles and wide distributions to effectively cover large work spaces. Lusio also delivers substantial energy savings and reduced maintenance costs, which played an integral role in the design of the new facility.”
The lighting system consists of Philips tubular LED lighting systems that are solar-powered by day and is powered by the Meralco power grid at night via a grid-interactive photovoltaic system. The photovoltaic system is made up of the solar panels along with the power converter, and is hooked up to the Meralco grid. With the system in place, the City of Mandaluyong is poised to save up to 51% in electricity expenses every year.
a leading innovator and manufacturer of high performance, architectural LED-based lighting solutions for commercial, institutional, and urban environments, today announced it has received U.S. Patent 8,179,058, issued May 15, 2012. The patent, the first of seven pending for the company’s Lumentalk? technology, provides a method of intuitively reading a traditional analog TRIAC dimmer in a digital fashion, which enables digital control of LED lighting over existing AC power lines, to maximize cost and energy savings.
The Lumentalk technology turns existing electrical wiring into a stable, noise-free high-speed communications link for data, enabling LED fixtures to be reliably controlled without additional wiring. The technology eliminates the cost and disruption of having to open up walls and ceilings to install additional data cabling as part of a retrofit project – enabling a dramatic 30% reduction in total installation costs.
The lighting system consists of Philips tubular LED lighting systems that are solar-powered by day and is powered by the Meralco power grid at night via a grid-interactive photovoltaic system. The photovoltaic system is made up of the solar panels along with the power converter, and is hooked up to the Meralco grid. With the system in place, the City of Mandaluyong is poised to save up to 51% in electricity expenses every year.
a leading innovator and manufacturer of high performance, architectural LED-based lighting solutions for commercial, institutional, and urban environments, today announced it has received U.S. Patent 8,179,058, issued May 15, 2012. The patent, the first of seven pending for the company’s Lumentalk? technology, provides a method of intuitively reading a traditional analog TRIAC dimmer in a digital fashion, which enables digital control of LED lighting over existing AC power lines, to maximize cost and energy savings.
The Lumentalk technology turns existing electrical wiring into a stable, noise-free high-speed communications link for data, enabling LED fixtures to be reliably controlled without additional wiring. The technology eliminates the cost and disruption of having to open up walls and ceilings to install additional data cabling as part of a retrofit project – enabling a dramatic 30% reduction in total installation costs.
2015年11月17日星期二
continues to develop exciting linear LED lighting solutions
Katona joins Next Lighting after previously working with Soraa Inc., serving in various management roles in engineering, marketing and business development since 2009. He has been working with Led high bay light for over 13 years, having received a Ph.D in Electrical Engineering from the University of California at Santa Barbara, a renowned center for solid-state lighting research.
“Tom brings a breadth of experience that bridges across both the traditional LED and lighting industries. This breadth is essential in developing innovative products that provide unique value during this time of transition in the lighting industry,” said Randall Sosnick, Chief Executive Officer. “We are very excited to add him to our core team that continues to develop exciting linear LED lighting solutions.”
Sharp's LED luminaires are powered by its Zenigata chip technology which enables the delivery of extremely energy-efficient luminaires that offer higher color quality and better performance than comparable traditional source lighting products, such as incandescent, halogen, compact fluorescent, and even ceramic metal halide.
As compared to other LED lighting products, Sharp Zenigata components operate at high efficiency levels, combined with high levels of color saturation, yielding a CRI well above 90+. Most other Led linear high bay light products with comparable light output typically deliver CRI measurements in the low to mid 80s. Sharp LED luminaires are superior to traditional source lighting products as they consume less energy and produce less heat resulting in additional energy savings and reduced HVAC loads in buildings. In addition, Sharp luminaires do not give off UV light, which can cause color fading in fabrics and artwork and do not contain mercury, which can lead to lamp disposal issues. Sharp luminaires feature extremely long lamp life delivering approximately 50,000 hours of operation, which can significantly reduce the relamping of traditional lighting sources from 10 to 50 times over the life of the lamp.
“Tom brings a breadth of experience that bridges across both the traditional LED and lighting industries. This breadth is essential in developing innovative products that provide unique value during this time of transition in the lighting industry,” said Randall Sosnick, Chief Executive Officer. “We are very excited to add him to our core team that continues to develop exciting linear LED lighting solutions.”
Sharp's LED luminaires are powered by its Zenigata chip technology which enables the delivery of extremely energy-efficient luminaires that offer higher color quality and better performance than comparable traditional source lighting products, such as incandescent, halogen, compact fluorescent, and even ceramic metal halide.
As compared to other LED lighting products, Sharp Zenigata components operate at high efficiency levels, combined with high levels of color saturation, yielding a CRI well above 90+. Most other Led linear high bay light products with comparable light output typically deliver CRI measurements in the low to mid 80s. Sharp LED luminaires are superior to traditional source lighting products as they consume less energy and produce less heat resulting in additional energy savings and reduced HVAC loads in buildings. In addition, Sharp luminaires do not give off UV light, which can cause color fading in fabrics and artwork and do not contain mercury, which can lead to lamp disposal issues. Sharp luminaires feature extremely long lamp life delivering approximately 50,000 hours of operation, which can significantly reduce the relamping of traditional lighting sources from 10 to 50 times over the life of the lamp.
2015年11月13日星期五
LED lights to provide better light output while slashing the cost potentially by more than half
The company has closed $2 million of the Series A round led by the Oregon Angel Fund and Portland-based venture capital firm Pivotal Investments. CEO Ron Nelson, who also contributed to the round, said another $1 million has been committed and should close by the end of July.The Led linear high bay light company is developing a technology which will allow manufacturers of long-lasting LED lights to provide better light output while slashing the cost potentially by more than half.
The funding round will be used to continue development. The company expects to return to the market later this year for a Series B round of between $4 million and $8 million, which would help build a sales team and gear up for manufacturing, which Nelson said could start sometime in the second half of 2013.
LEDs emit high-intensity blue energy that, when emitted through various colored phosphors, converts to the warmer hues typical of home or office use. Pacific Light aims to replace the use of those phosphors with “quantum dots” — chemically created microscopic semiconductors that Nelson says provide stronger output that is tuneable to different hues.
According to the research team, they designed low droop and high efficacy Led high bay light by altering the direction of the crystal structure within semiconductor films. Droop refers to significant drop in efficiency at extreme currents. It is one of the major factors that retard the growth of the solid-state lighting market.
The funding round will be used to continue development. The company expects to return to the market later this year for a Series B round of between $4 million and $8 million, which would help build a sales team and gear up for manufacturing, which Nelson said could start sometime in the second half of 2013.
LEDs emit high-intensity blue energy that, when emitted through various colored phosphors, converts to the warmer hues typical of home or office use. Pacific Light aims to replace the use of those phosphors with “quantum dots” — chemically created microscopic semiconductors that Nelson says provide stronger output that is tuneable to different hues.
According to the research team, they designed low droop and high efficacy Led high bay light by altering the direction of the crystal structure within semiconductor films. Droop refers to significant drop in efficiency at extreme currents. It is one of the major factors that retard the growth of the solid-state lighting market.
2015年11月11日星期三
Intematix is offering us a solution that gives us a competitive advantage in the high quality lighting arena
ChromaLit XT is designed for the many applications that need high lumen output from a small space,” said Julian Carey, Senior Director of Led linear high bay light at Intematix. “Lighting designers and architects will appreciate the ability to take advantage of ChromaLit’s substantial benefits without sacrificing aesthetics based on ChromaLit XT’s unique off-state neutral color.”
“ChromaLit XT allows us to push the envelope when it comes to providing higher outputs for smaller lighting apertures incorporating remote phosphor technology,” said Andrew Littler, Director of Vexica, an LED lighting solutions company. Vexica’s LUMAERA-50-RP module incorporates ChromaLit XT to provide customers with a wide range of LED solutions without expensive research and development costs. “The high CRI we can achieve with our LUMAERA-50 module using ChromaLit XT is a huge advantage for professional specification clients such as lighting designers and architects. Intematix is offering us a solution that gives us a competitive advantage in the high quality lighting arena.”
ChromaLit XT is optically treated to maintain an off-state neutral appearance in order to look as good off as it does on – perfect for lighting designers. The added design freedom of ChromaLit XT means users can let exposed lights like pendant lamps and downlights integrate with the rest of the space without sacrificing the high performance of ChromaLit. In highly visual environments like restaurants and hotels, ChromaLit XT allows fixtures to complement the design flow.
All American Semiconductor expands its Led high bay light offering by partnering with LED Engin, Inc. to offer a full range of high brightness, compact emitters, lenses and modules. LED Engin develops, manufactures, and sells advanced LED emitters, optics components and light source modules in a unique, high-lumen density, compact, multi-die package that enable solid-state lighting solutions for a wide range of applications. LED Engin emitters are used in applications ranging from Architectural, Stage and Studio, High and Low Bay Lighting, Downlighting and General Lighting as well as many industrial applications.
“ChromaLit XT allows us to push the envelope when it comes to providing higher outputs for smaller lighting apertures incorporating remote phosphor technology,” said Andrew Littler, Director of Vexica, an LED lighting solutions company. Vexica’s LUMAERA-50-RP module incorporates ChromaLit XT to provide customers with a wide range of LED solutions without expensive research and development costs. “The high CRI we can achieve with our LUMAERA-50 module using ChromaLit XT is a huge advantage for professional specification clients such as lighting designers and architects. Intematix is offering us a solution that gives us a competitive advantage in the high quality lighting arena.”
ChromaLit XT is optically treated to maintain an off-state neutral appearance in order to look as good off as it does on – perfect for lighting designers. The added design freedom of ChromaLit XT means users can let exposed lights like pendant lamps and downlights integrate with the rest of the space without sacrificing the high performance of ChromaLit. In highly visual environments like restaurants and hotels, ChromaLit XT allows fixtures to complement the design flow.
All American Semiconductor expands its Led high bay light offering by partnering with LED Engin, Inc. to offer a full range of high brightness, compact emitters, lenses and modules. LED Engin develops, manufactures, and sells advanced LED emitters, optics components and light source modules in a unique, high-lumen density, compact, multi-die package that enable solid-state lighting solutions for a wide range of applications. LED Engin emitters are used in applications ranging from Architectural, Stage and Studio, High and Low Bay Lighting, Downlighting and General Lighting as well as many industrial applications.
2015年11月10日星期二
Panel lights don't have to be suspended overhead
FZLED panel lights are a breeze to install, reducing labor expenses. Mounting the lights can take as little as five minutes, requiring no starters or electrical ballasts. With a slim profile just 13 millimeters thick, the panels are light and easy to adjust. Three models provide maximum choice: led high bay light smallest panel light measures just 300 by 300 millimeters, doubling to 600 by 600 millimeters for a midsize model at and the largest model measuring 1,200 by 300 millimeters. The midsize and large models use a modest 52 watts of power for all applications.
Panel lights don't have to be suspended overhead. Standing the lights upright, the panel lights become backlights for picture frames that illuminate images from behind. Emitting no heat, UV or IR rays, FZLED’s panel lights provide glare-free and gentle illumination. With more form factors and adjustable illumination options, FZLED's panel lights deliver maximum performance with a minimal carbon footprint.
Among these awards, there are total $4.5 million for the new IDG System, including installations for industrial, retail, municipal, and military facilities. The new LED Area Light awards total $0.4 million, including orders from seven utilities, and several repeat orders. And the utility infrastructure awards total $5.1 million, including transmission, distribution, and substation upgrade projects for utilities and their large industrial customers.
All of these awards are for turnkey sales of products and services, and their expected timing will be included in the led linear high bay light Company's revenue backlog report to be issued in conjunction with its upcoming earnings release on May 3, 2012.
Panel lights don't have to be suspended overhead. Standing the lights upright, the panel lights become backlights for picture frames that illuminate images from behind. Emitting no heat, UV or IR rays, FZLED’s panel lights provide glare-free and gentle illumination. With more form factors and adjustable illumination options, FZLED's panel lights deliver maximum performance with a minimal carbon footprint.
Among these awards, there are total $4.5 million for the new IDG System, including installations for industrial, retail, municipal, and military facilities. The new LED Area Light awards total $0.4 million, including orders from seven utilities, and several repeat orders. And the utility infrastructure awards total $5.1 million, including transmission, distribution, and substation upgrade projects for utilities and their large industrial customers.
All of these awards are for turnkey sales of products and services, and their expected timing will be included in the led linear high bay light Company's revenue backlog report to be issued in conjunction with its upcoming earnings release on May 3, 2012.
2015年11月9日星期一
LED can also assist with the identificaiton of various rebate
Quality of Light In addition to its low power and high efficacy, the SERIES L7 has a high color rendering index (CRI) of 84. and mix LEDs to ensure even color across a fixture or installation. The fixture has a 50,000-hour life,led high bay light is fully recyclable, and backed by a manufacturer’s warranty. All Lunera fixtures have been independently certified by leading third party organizations.
Capital Lease Financing Initial costs of installing the SERIES L7 can be eliminated for qualified customers through a simple five-year term capital equipment lease offered by Lunera Capital PlusSM (LCP), a private financing service of Lunera Lighting. LED can also assist with the identificaiton of various rebate and incentive programs that save even more.
By collaborating with The Noun Project, we now have a universal symbol that represents LED lighting, filling a significant void in the energy-efficient lighting landscape,” said Ginny Skalski, social media specialist, Cree. “As Cree continues leading the way for LED lighting adoption, this new icon will allow the public and the media to stop using antiquated Edison or swirly CFL bulb designs to symbolize lighting.”
The day-long collaborative workshop, led by The Noun Project co-founder Edward Boatman, included nearly 40 attendees who sketched new symbols for led linear high bay light and a variety of energy-efficient technologies. All of the designs were discussed and critiqued to ensure the best iconic representation for each of the 15 energy-efficient technologies and concepts, including wind and solar farms and energy audits. The sketches were recently digitized and are now available for public use under a Creative Commons license.
Capital Lease Financing Initial costs of installing the SERIES L7 can be eliminated for qualified customers through a simple five-year term capital equipment lease offered by Lunera Capital PlusSM (LCP), a private financing service of Lunera Lighting. LED can also assist with the identificaiton of various rebate and incentive programs that save even more.
By collaborating with The Noun Project, we now have a universal symbol that represents LED lighting, filling a significant void in the energy-efficient lighting landscape,” said Ginny Skalski, social media specialist, Cree. “As Cree continues leading the way for LED lighting adoption, this new icon will allow the public and the media to stop using antiquated Edison or swirly CFL bulb designs to symbolize lighting.”
The day-long collaborative workshop, led by The Noun Project co-founder Edward Boatman, included nearly 40 attendees who sketched new symbols for led linear high bay light and a variety of energy-efficient technologies. All of the designs were discussed and critiqued to ensure the best iconic representation for each of the 15 energy-efficient technologies and concepts, including wind and solar farms and energy audits. The sketches were recently digitized and are now available for public use under a Creative Commons license.
2015年11月5日星期四
Rubicon will display its line of optical products including very large size sapphire windows
Rubicon's ES2 crystal growth method has been refined over the past 11 years to provide consistently high yield and the highest quality sapphire for our customers," said Raja Parvez, president and CEO of led linear high bay light Technology. "With this expertise, Rubicon has been able to scale the growth of bulk crystal up to 200 kg without compromising high quality or high yield. This enables us to produce industry-leading, very large, defect-free sapphire crystal for use in the optical market for a wide range of industrial applications."
Rubicon provides sapphire products in 4-inch, 6-inch and 8-inch diameters and will be exhibiting a 12-inch sapphire window. Rubicon will display its line of optical products including very large size sapphire windows and blanks for use in Defense and Aerospace, Instrumentation and Analytical Processing, Sensors and Detectors, Semiconductor Process Equipment, and Medical and Laser applications.
Defense & Aerospace -- Sapphire is used in the defense and aerospace industries due to its broad transmission range in the UV through IR spectrum, resistance to scratching and corrosion in sand or salt environments and impact resistance. Applications include targeting systems and protected optics for fighter jets, UAVs and helicopters, FLIRs and Enhanced Vision Systems for aircraft, sensor suites and shaped optics for land, air and sea vehicles, missile domes, countermeasure lamps and transparent armor systems.
Instrumentation & Analytical Processing -- Sapphire often replaces quartz and glass to provide longer life in equipment and consumables. Sapphire's chemical resistance, ability to withstand high temperature and led high bay light pressure, and ability to transmit in UV and IR ranges make it ideal for applications in instrumentation and analytical processing such as mass spectrometry, spectrophotometry, digestive cells, and other analytical applications.
Rubicon provides sapphire products in 4-inch, 6-inch and 8-inch diameters and will be exhibiting a 12-inch sapphire window. Rubicon will display its line of optical products including very large size sapphire windows and blanks for use in Defense and Aerospace, Instrumentation and Analytical Processing, Sensors and Detectors, Semiconductor Process Equipment, and Medical and Laser applications.
Defense & Aerospace -- Sapphire is used in the defense and aerospace industries due to its broad transmission range in the UV through IR spectrum, resistance to scratching and corrosion in sand or salt environments and impact resistance. Applications include targeting systems and protected optics for fighter jets, UAVs and helicopters, FLIRs and Enhanced Vision Systems for aircraft, sensor suites and shaped optics for land, air and sea vehicles, missile domes, countermeasure lamps and transparent armor systems.
Instrumentation & Analytical Processing -- Sapphire often replaces quartz and glass to provide longer life in equipment and consumables. Sapphire's chemical resistance, ability to withstand high temperature and led high bay light pressure, and ability to transmit in UV and IR ranges make it ideal for applications in instrumentation and analytical processing such as mass spectrometry, spectrophotometry, digestive cells, and other analytical applications.
electricity annually compared to traditional lighting methods
Ecomaa, who advocated eco-friendly concept, provided it’s long-life LED AR111 spotlight series to reduce the power consumption of the stores. The led high bay light saving more than 60 percent of energy consumption and also more than 35 percent of electricity annually compared to traditional lighting methods.It solved the problems of power-hungry with the installation of traditional halogen lamp in the past.
Denim House’s store equipped with Ecomaa’s European standard series- 19W AR111 as light source. The Eco-AR111 featuring a luminous flux of ca.1,240 lm and a color temperature of 3,500 K. The light pattern can reveal the complete uniformity of the illuminated area at pole heights of 4 m to subjoin the display’s product a fashion sense.
Eco-AR111 series possess the similiar brightness with 50W AR111 halogen lamp but only need 19 watts of power consumption. It can be used 10 hours a day, and up to 81 percent reduction in electricity and carbon emissions annually. By advanced accurate heat thermal and active Air simulation, Ecomaa effectively reduce the heat of LED lighting to improve more stability and high quality working condition. The Eco-AR111 also certified by the TUV, UL, CE, FCC and RoHS.This collaboration allows the whole stores of Denim House in Taiwan joined the ranks of energy saving, and also to become the leader of the Green concept advocating, besides of leading the trend of fashion.
Sapphire is ideal for high-performance optical applications because of its led linear high bay light physical properties such as optical transparency, physical strength, resistance to abrasion and corrosion, temperature durability, and bio-compatibility.
Denim House’s store equipped with Ecomaa’s European standard series- 19W AR111 as light source. The Eco-AR111 featuring a luminous flux of ca.1,240 lm and a color temperature of 3,500 K. The light pattern can reveal the complete uniformity of the illuminated area at pole heights of 4 m to subjoin the display’s product a fashion sense.
Eco-AR111 series possess the similiar brightness with 50W AR111 halogen lamp but only need 19 watts of power consumption. It can be used 10 hours a day, and up to 81 percent reduction in electricity and carbon emissions annually. By advanced accurate heat thermal and active Air simulation, Ecomaa effectively reduce the heat of LED lighting to improve more stability and high quality working condition. The Eco-AR111 also certified by the TUV, UL, CE, FCC and RoHS.This collaboration allows the whole stores of Denim House in Taiwan joined the ranks of energy saving, and also to become the leader of the Green concept advocating, besides of leading the trend of fashion.
Sapphire is ideal for high-performance optical applications because of its led linear high bay light physical properties such as optical transparency, physical strength, resistance to abrasion and corrosion, temperature durability, and bio-compatibility.
special scaffolding is needed to reach fixtures in the high ceiling
Security and energy savings were top priorities when considering new lighting to cover the nearly 2 million square feet (45 acres) of parking and garage space at Marriott headquarters. After testing competitive exterior garage fixtures, parking lot lights and contemporary post tops, Marriott selected GE's family of high-efficiency Evolve™ LED lighting systems.
"We preferred the exceptional output and uniformity of GE's Evolve LED lighting," says Jim Young, vice president, corporate facilities for Marriott International, Inc. "GE performed a comprehensive lighting audit of our existing system, provided photometric analysis with 3D renderings of the new system, and forecasted our energy and maintenance savings. GE excelled as both a trusted strategic consultant and solutions provider."
More than 230 Evolve LED Area Lights now illuminate Marriott's outdoor lots, while inside the parking deck nearly 400 Evolve LED Garage Light fixtures and several Evolve LED Tunnel Light installations-as well as more efficient GE T8 fluorescent lamps-help light the way for associates to and from the headquarters offices. Collectively, a 280-watt reduction per outdoor lighting fixture will cut electricity use by 580,000 kWhs a year, equating to $70,000 in utility cost savings.
In the foyer, special scaffolding is needed to reach fixtures in the high ceiling. Marriott would change the lights, which lasted just one to two years on average, only once a year at a cost close to $3,000. Maintenance savings will now add up after GE replaced 12 90-watt bulbs with 20-watt LED PAR38 lamps. Rated for 50,000 hours of life, GE's LEDs could keep the scaffolding away for up to seven years.
"We preferred the exceptional output and uniformity of GE's Evolve LED lighting," says Jim Young, vice president, corporate facilities for Marriott International, Inc. "GE performed a comprehensive lighting audit of our existing system, provided photometric analysis with 3D renderings of the new system, and forecasted our energy and maintenance savings. GE excelled as both a trusted strategic consultant and solutions provider."
More than 230 Evolve LED Area Lights now illuminate Marriott's outdoor lots, while inside the parking deck nearly 400 Evolve LED Garage Light fixtures and several Evolve LED Tunnel Light installations-as well as more efficient GE T8 fluorescent lamps-help light the way for associates to and from the headquarters offices. Collectively, a 280-watt reduction per outdoor lighting fixture will cut electricity use by 580,000 kWhs a year, equating to $70,000 in utility cost savings.
In the foyer, special scaffolding is needed to reach fixtures in the high ceiling. Marriott would change the lights, which lasted just one to two years on average, only once a year at a cost close to $3,000. Maintenance savings will now add up after GE replaced 12 90-watt bulbs with 20-watt LED PAR38 lamps. Rated for 50,000 hours of life, GE's LEDs could keep the scaffolding away for up to seven years.
2015年11月4日星期三
This can then be used as a selectable night light
The product is a compact power harvesting, storage, and lighting system. Electric power generated by solar cells during the day is stored in a nickel-metal hydride battery unit. This can then be used as a selectable night light and power source for charging small items of equipment, such as cellphones.
At present, 1.3 billion people worldwide*1 live in areas with no or intermittent mains electricity. This means that approximately 20% of the world's population (one person in five)*1 lives without enjoying the advantages of electricity. In most non-electrified areas, people use kerosene lamps, rechargeable lanterns, diesel generators, etc., to provide lighting. However, these forms of led high bay light equipment have numerous drawbacks, including toxic exhaust, low levels of illumination, and high running costs. Cellphone networks are, however, widespread in these areas, despite the lack of an equipment-recharging infrastructure.
Panasonic is committed to the reliable supply of clean and safe light and power. This commitment led to the production of its "Solar Lantern" in 2013-a portable lantern that provides non-electrified areas with the light that people need. Now the company has added "eneloop solar storage" to its lineup of products. The product comes with a straight tube LED and a bulb-type LED, which deliver bright, high-quality light, and the unit can also be used as a high-capacity power source for charging multiple cellphones. The new product will be marketed not only through existing sales dealers but also via international organizations such as NPOs and NGOs that are helping people living in non-electrified areas to develop a better standard of living environment.
Philips Lumileds has fully launched LUXEON M which is now in volume production. The new emitter has already been approved for street lighting in major US cities with designs to be shown at Light + Building.led linear high bay light lumen output—more than 1100 lumens— and typical voltage of 11.2V drives down system cost and improves system performance through the use of low cost, highly efficient drivers. The tremendous light output and efficacy at operating conditions lowers overall solution costs.
At present, 1.3 billion people worldwide*1 live in areas with no or intermittent mains electricity. This means that approximately 20% of the world's population (one person in five)*1 lives without enjoying the advantages of electricity. In most non-electrified areas, people use kerosene lamps, rechargeable lanterns, diesel generators, etc., to provide lighting. However, these forms of led high bay light equipment have numerous drawbacks, including toxic exhaust, low levels of illumination, and high running costs. Cellphone networks are, however, widespread in these areas, despite the lack of an equipment-recharging infrastructure.
Panasonic is committed to the reliable supply of clean and safe light and power. This commitment led to the production of its "Solar Lantern" in 2013-a portable lantern that provides non-electrified areas with the light that people need. Now the company has added "eneloop solar storage" to its lineup of products. The product comes with a straight tube LED and a bulb-type LED, which deliver bright, high-quality light, and the unit can also be used as a high-capacity power source for charging multiple cellphones. The new product will be marketed not only through existing sales dealers but also via international organizations such as NPOs and NGOs that are helping people living in non-electrified areas to develop a better standard of living environment.
Philips Lumileds has fully launched LUXEON M which is now in volume production. The new emitter has already been approved for street lighting in major US cities with designs to be shown at Light + Building.led linear high bay light lumen output—more than 1100 lumens— and typical voltage of 11.2V drives down system cost and improves system performance through the use of low cost, highly efficient drivers. The tremendous light output and efficacy at operating conditions lowers overall solution costs.
2015年11月3日星期二
Lighting products can provide proper illumination while also significantly lowering overall cost
Ideal for end-users looking to improve illumination and decrease energy and maintenance costs, the Lumark Ridgeview LED luminaires offer a compact, efficient and economical approach to LED lighting that combines a low-profile design with excellent operating performance. For uniform and energy conscious illumination, Ridgeview LED fixtures include scalable IP66 rated led linear high bay light technology with patented AccuLED Optics? allowing for an energy savings between 30-70 percent over standard H.I.D. systems. Additional benefits include a warm white light of 4000K correlated color temperature (CCT) that won’t sacrifice lumen output; 50,000+ hour rated life, six times longer than traditional metal halide sources; and durable die-cast aluminum construction.
“More and more customers are turning to reliable LED fixtures to address their lighting needs,” said Mark Eubanks, President, Cooper Lighting. “While the shift is certainly due to the overall energy savings LED lighting can provide, we’ve found that many customers are upgrading based on the lighting performance associated with our LED technology. Our work with the Grand Traverse County Civic Center is yet another great example of how choosing Cooper Lighting products can provide proper illumination while also significantly lowering overall cost.”
Grand Traverse County funded the project in large part to a $45,000 Advanced Lighting Technology Demonstration Grant from the State of Michigan Energy Office. The grant was awarded through the American Recovery and Reinvestment Act (Recovery Act) for projects that create and retain jobs, save energy and reduce greenhouse gas emissions. Funding was awarded to local units of government that were willing to demonstrate the benefits of advanced commercial lighting technologies in their facilities.
Cree is a proven leader in LED-based street and area luminaires,” said Christopher Ruud, vice president and general manager, Cree lighting. “Building on that success and combining cutting-edge form and function, Aeroblades luminaires leverage Cree? LED technology while incorporating forward-thinking and aesthetically pleasing architectural design to enhance the surroundings.”
“More and more customers are turning to reliable LED fixtures to address their lighting needs,” said Mark Eubanks, President, Cooper Lighting. “While the shift is certainly due to the overall energy savings LED lighting can provide, we’ve found that many customers are upgrading based on the lighting performance associated with our LED technology. Our work with the Grand Traverse County Civic Center is yet another great example of how choosing Cooper Lighting products can provide proper illumination while also significantly lowering overall cost.”
Grand Traverse County funded the project in large part to a $45,000 Advanced Lighting Technology Demonstration Grant from the State of Michigan Energy Office. The grant was awarded through the American Recovery and Reinvestment Act (Recovery Act) for projects that create and retain jobs, save energy and reduce greenhouse gas emissions. Funding was awarded to local units of government that were willing to demonstrate the benefits of advanced commercial lighting technologies in their facilities.
Cree is a proven leader in LED-based street and area luminaires,” said Christopher Ruud, vice president and general manager, Cree lighting. “Building on that success and combining cutting-edge form and function, Aeroblades luminaires leverage Cree? LED technology while incorporating forward-thinking and aesthetically pleasing architectural design to enhance the surroundings.”
2015年11月2日星期一
the need for costly secondary thermal management systems
The LMH2 module separates the light source and power supply to enable a wide selection of mounting and wiring options – giving lighting manufacturers the flexibility needed for rapid led high bay light design and development. LMH2 modules also feature primary thermal management – potentially eliminating the need for costly secondary thermal management systems.
“The LMH2 LED module family now obsoletes the need to even consider compact fluorescent alternatives,” said Mike Watson, Cree senior director marketing, LED components. “Not only does the family of LMH2 LED modules outperform this traditional lighting technology, but it does so across a wide range of color and lumen options with unparalleled color quality, efficacy and warranty, enabling lighting manufacturers to address an entire range of lighting applications.”
The module is available with Digital Addressable Lighting Interface (DALI) and DALI touch dimming. Designed for 50,000 hours of operation and dimmable to five percent, the LMH2 comes with Cree’s industry-leading warranty. Luminaire makers seeking ENERGY STAR® qualification will have access to specification and performance data, including LM-80 reports, which can speed regulatory approvals.
Visit Cree at Light+Building 2012 at Hall 4.2, Stand G71 to see the led linear high bay light module used in different applications. Samples are available now and production quantities are available with standard lead times from Cree distributors. Visit DGA at Light+Building at Hall 3.1, Stand C41, to see DGA luminaires based on the LMH2 family.
“The LMH2 LED module family now obsoletes the need to even consider compact fluorescent alternatives,” said Mike Watson, Cree senior director marketing, LED components. “Not only does the family of LMH2 LED modules outperform this traditional lighting technology, but it does so across a wide range of color and lumen options with unparalleled color quality, efficacy and warranty, enabling lighting manufacturers to address an entire range of lighting applications.”
The module is available with Digital Addressable Lighting Interface (DALI) and DALI touch dimming. Designed for 50,000 hours of operation and dimmable to five percent, the LMH2 comes with Cree’s industry-leading warranty. Luminaire makers seeking ENERGY STAR® qualification will have access to specification and performance data, including LM-80 reports, which can speed regulatory approvals.
Visit Cree at Light+Building 2012 at Hall 4.2, Stand G71 to see the led linear high bay light module used in different applications. Samples are available now and production quantities are available with standard lead times from Cree distributors. Visit DGA at Light+Building at Hall 3.1, Stand C41, to see DGA luminaires based on the LMH2 family.
2015年10月22日星期四
lighting solutions that are transforming not only the application of lighting
It’s fitting that this time capsule was meant to be unearthed when significant changes in the incandescent light bulb occurred,” commented GE Lighting’s President & CEO Maryrose Sylvester. “We’re celebrating innovation at a time when GE scientists and engineers at Nela Park and around the world are developing advanced lighting solutions that are transforming not only the application of lighting, but also the business of lighting.”
GE’s energy-efficient lighting solutions are enabling millions of dollars in energy and maintenance cost savings for some of the world’s biggest and best-known brands, and municipality roadway projects of every size.
When GE customers such as Marriott, Walmart and cities big and small—from Sydney, Australia to Stamford, Connecticut—can save money with energy-efficient lighting that costs less to operate and lasts as long as a decade,” adds Sylvester, “they can put the savings toward new or expanded growth initiatives. We’ve always been a company that offers solutions that make the world work better. Just ask our customers.”
In April 2013, the company will bring Nela Park employees together for a ceremonial burying of a new time capsule, which is expected to include a GE Energy Smart? 60-watt LED bulb that lasts over 22 years when operated 3 hours a day, new more informative consumer light bulb packaging debuting in 2012, marketing materials and an employee photo.
GE’s energy-efficient lighting solutions are enabling millions of dollars in energy and maintenance cost savings for some of the world’s biggest and best-known brands, and municipality roadway projects of every size.
When GE customers such as Marriott, Walmart and cities big and small—from Sydney, Australia to Stamford, Connecticut—can save money with energy-efficient lighting that costs less to operate and lasts as long as a decade,” adds Sylvester, “they can put the savings toward new or expanded growth initiatives. We’ve always been a company that offers solutions that make the world work better. Just ask our customers.”
In April 2013, the company will bring Nela Park employees together for a ceremonial burying of a new time capsule, which is expected to include a GE Energy Smart? 60-watt LED bulb that lasts over 22 years when operated 3 hours a day, new more informative consumer light bulb packaging debuting in 2012, marketing materials and an employee photo.
2015年10月21日星期三
the company has centered on promoting its own-brand LED lighting fixtures
The LEDs can be used in spotlights of any size, from small stage spots to large moving heads. Volker Mertens, LED Marketing Manager at OSRAM Opto Semiconductors explains: “OSRAM Ostar Stage has a wide range of applications with different colors and configurations – a real treat for lamp designers. More color combinations are in the pipeline for the Ostar platform. By mixing the different OSRAM Ostar types it is possible to create an enormous range of colors, including pastel shades.”
Everlight executives estimated the company’s capacity utilization ratio would pick up quarter on quarter in 2012 to full capacity in the third quarter thanks to increasing penetration of LCD TVs lit by LED backlights and growing market of LED lighting. While staying profitable, the company had decreased utilization capacity ratio in the fourth quarter in 2011.Since 2011, the company has centered on promoting its own-brand LED lighting fixtures and won contracts to supply LED streetlights to mainland China provinces of Guangdong, Jiangsu, Sichuan, and Hebei. Lighting sales are estimated to account for around 10% of the company’s 2012 revenue.
ASF(tm) utilizes the production-proven heat exchanger method (HEM) for producing high quality sapphire boules and cores suitable for the LED industry and other industries requiring high quality sapphire material.The ASF furnaces will increase Shangcheng’s production capacity, which the company believes is needed to meet expected demand from the LED industry and other industrial applications.
Colors have never been richer at the National Automobile Museum (The Harrah Collection) in Reno, Nev., and it has enthusiasts seeing vintage cars in a new light. Following the installation of more than 600 GE energy smart? LED replacement lamps, patrons are remarking on a "remarkable difference" and the museum is enjoying $18,000 in annual electricity savings as the result of its environmentally intelligent investment.
Everlight executives estimated the company’s capacity utilization ratio would pick up quarter on quarter in 2012 to full capacity in the third quarter thanks to increasing penetration of LCD TVs lit by LED backlights and growing market of LED lighting. While staying profitable, the company had decreased utilization capacity ratio in the fourth quarter in 2011.Since 2011, the company has centered on promoting its own-brand LED lighting fixtures and won contracts to supply LED streetlights to mainland China provinces of Guangdong, Jiangsu, Sichuan, and Hebei. Lighting sales are estimated to account for around 10% of the company’s 2012 revenue.
ASF(tm) utilizes the production-proven heat exchanger method (HEM) for producing high quality sapphire boules and cores suitable for the LED industry and other industries requiring high quality sapphire material.The ASF furnaces will increase Shangcheng’s production capacity, which the company believes is needed to meet expected demand from the LED industry and other industrial applications.
Colors have never been richer at the National Automobile Museum (The Harrah Collection) in Reno, Nev., and it has enthusiasts seeing vintage cars in a new light. Following the installation of more than 600 GE energy smart? LED replacement lamps, patrons are remarking on a "remarkable difference" and the museum is enjoying $18,000 in annual electricity savings as the result of its environmentally intelligent investment.
2015年10月16日星期五
the rising demand for energy-saving products in the mainland
Furthermore, Yeh pointed out Taiwan began the development of the led high bay light industry earlier than mainland China, and Taiwan has already set up solid foundation for the industry’s supply chain, technological development, product design and management.
In his opinion, the development can create an industry synergy relation between Taiwan and the mainland based on the rising demand for energy-saving products in the mainland, which is said to be the world’s biggest market for LED lighting.
Sylvester was pleased to receive the award and said that, "We're proud that GE Lighting has more than 500 ENERGY STAR(R)-qualified products which provide increased energy efficiency for our customers. Being recognized for sustained excellence shows the value of listening to customers, and points to our ability to swiftly put innovations born in GE labs into the hands of customers."
Under the agreement, Fikra will provide its customers and local market with a variety of advanced systems and products of a leading led linear high bay light system brand such as Cooper that is used in a range of prestigious construction projects.
In his opinion, the development can create an industry synergy relation between Taiwan and the mainland based on the rising demand for energy-saving products in the mainland, which is said to be the world’s biggest market for LED lighting.
Sylvester was pleased to receive the award and said that, "We're proud that GE Lighting has more than 500 ENERGY STAR(R)-qualified products which provide increased energy efficiency for our customers. Being recognized for sustained excellence shows the value of listening to customers, and points to our ability to swiftly put innovations born in GE labs into the hands of customers."
Under the agreement, Fikra will provide its customers and local market with a variety of advanced systems and products of a leading led linear high bay light system brand such as Cooper that is used in a range of prestigious construction projects.
2015年10月15日星期四
the show has gained recognition with LED manufacturers
While lighting LEDs have grown in efficiency they have faced challenges in color quality and thermal management in small form-factors. Intematix phosphors enable white led high bay light comparable to conventional sources and ChromaLit remote phosphor systems have shown more efficient cooling leading to compact light bulb solutions.
According to Walter Yeh, executive vice president of the Taiwan External Trade Development Council (TAITRA), one of the organizers of the show, this year, the show has gained recognition with LED manufacturers, evidenced by the rise in the number of participating companies.
A record 321 lighting equipment manufacturers are manning 782 booths at the show, up from 634 booths last year and 404 booths in 2010. At the invitation of TAITRA, 1,200 buyers from 70 countries are expected to attend.
Additionally, the show also features the conjunction of the annual meetings of the Global Lighting Association and the International Commission on Illumination-Taiwan, in which attendees will explore the future trends of the led linear high bay light industry and push for the alignment of local specifications with international ones.
According to Walter Yeh, executive vice president of the Taiwan External Trade Development Council (TAITRA), one of the organizers of the show, this year, the show has gained recognition with LED manufacturers, evidenced by the rise in the number of participating companies.
A record 321 lighting equipment manufacturers are manning 782 booths at the show, up from 634 booths last year and 404 booths in 2010. At the invitation of TAITRA, 1,200 buyers from 70 countries are expected to attend.
Additionally, the show also features the conjunction of the annual meetings of the Global Lighting Association and the International Commission on Illumination-Taiwan, in which attendees will explore the future trends of the led linear high bay light industry and push for the alignment of local specifications with international ones.
2015年10月14日星期三
revenues attributed to LEDs for each display screen are dropping rapidly
According to the new report "LEDs: The 2011 Market Review," in 2011, the market volume for high brightness LEDs (HB-LEDs) reached $12 billion, a 4.3% growth over 2010. Although the demand for led high bay light (back light unit) systems is still growing, the demand for LED chips is falling.
Fewer LEDs are needed to realise a BLU and with the cost per LED also dropping, revenues attributed to LEDs for each display screen are dropping rapidly.
The production of BLU based on LEDs should continue to rise through 2014. The demand for LEDs to produce edge-lit BLU has peaked and will settle at about 70% of its maximum value in 2010-2011.
The European Photonics Industry Consortium has utilized the EPIC Bellwether Index of key companies to indicate the commercial development of solid-state lighting in general. And the Bellwether companies showed rather different levels of performance in 2011. For example, lighting systems companies like Philips and Zumtobel developed well, while chip manufacturers like Epistar and Cree showed mixed results. Scale-back of led linear high bay light purchases due to slowing demand in the back lighting market, and the end of purchase subsidies by the Chinese government have an important influence on Aixtron.
Fewer LEDs are needed to realise a BLU and with the cost per LED also dropping, revenues attributed to LEDs for each display screen are dropping rapidly.
The production of BLU based on LEDs should continue to rise through 2014. The demand for LEDs to produce edge-lit BLU has peaked and will settle at about 70% of its maximum value in 2010-2011.
The European Photonics Industry Consortium has utilized the EPIC Bellwether Index of key companies to indicate the commercial development of solid-state lighting in general. And the Bellwether companies showed rather different levels of performance in 2011. For example, lighting systems companies like Philips and Zumtobel developed well, while chip manufacturers like Epistar and Cree showed mixed results. Scale-back of led linear high bay light purchases due to slowing demand in the back lighting market, and the end of purchase subsidies by the Chinese government have an important influence on Aixtron.
2015年10月13日星期二
limit how often workers need to tend to the lights
Buzo praised the results: “It’s great lighting. It kind of surrounds you, kind of engulfs you, and it gives you a clear picture of led high bay light what you’re working around as far as your surroundings.”
The light fixtures are rated to last seven to 10 years, operating 24 hours a day, seven days a week, Metz said. Their staying power should reduce operating costs and limit how often workers need to tend to the lights, which are 45 feet above the production floor.
The quality of the light is also an improvement, Metz said. “The color rendering of these lights makes it a safer work environment by providing truer colors to the workers’ eyes, as well as allowing workers to differentiate between colors easier,” he said.
Currently, the Middle East and Africa have faced most pressure in manage water supplies due to water shortages. And PlantLab has invented a way to grow plants under LED lights indoors, with all the water recycled within the indoor environment for reuse to solve the problem.
According to the company, plants are not that dependent on using the sun for photosynthesis. And they certainly don’t mind being separated from their pests. And they are fine with 90 percent less water, if they get it over and over again.
They use led linear high bay light to grow the plants and water them with a slow trickle that drains through the soil and is collected and reused. Computers capture over 160,000 reports per second to determine the exact amount, cycle, and color spectrum of light that’s optimal for the plant, as well as water, so that no resource is wasted and the plant is neither undernourished nor overexposed.
The light fixtures are rated to last seven to 10 years, operating 24 hours a day, seven days a week, Metz said. Their staying power should reduce operating costs and limit how often workers need to tend to the lights, which are 45 feet above the production floor.
The quality of the light is also an improvement, Metz said. “The color rendering of these lights makes it a safer work environment by providing truer colors to the workers’ eyes, as well as allowing workers to differentiate between colors easier,” he said.
Currently, the Middle East and Africa have faced most pressure in manage water supplies due to water shortages. And PlantLab has invented a way to grow plants under LED lights indoors, with all the water recycled within the indoor environment for reuse to solve the problem.
According to the company, plants are not that dependent on using the sun for photosynthesis. And they certainly don’t mind being separated from their pests. And they are fine with 90 percent less water, if they get it over and over again.
They use led linear high bay light to grow the plants and water them with a slow trickle that drains through the soil and is collected and reused. Computers capture over 160,000 reports per second to determine the exact amount, cycle, and color spectrum of light that’s optimal for the plant, as well as water, so that no resource is wasted and the plant is neither undernourished nor overexposed.
2015年10月9日星期五
the development of standard specifications for the interfaces of LED light engines
According to Cree, compared with current lighting, the new installations will offer an energy saving between 45 per cent and 76 per cent, depending on the individual requirements of each Embassy.“Embassies are a great vehicle to showcase US innovation and influence global commercial led high bay light and industrial organizations to take action, consume less energy and advance energy efficiency.” Said by Greg Merritt, VP of coprorate marketing at Cree.
The League of Green Embassies was established in 2007 to reduce greenhouse emissions and showcase US technology as well as increase US exports.This new testing service offering will be available separately or as a bundle with other UL lighting industry services such as Energy Star, performance testing and safety certification.
Zhaga is an industry-wide cooperation aimed at the development of standard specifications for the interfaces of led linear high bay light engines. The organization creates interface specifications for 'light engines' with the goal to promote interchangeability of light engines made by different manufacturers; different lighting applications need different light engines.
The League of Green Embassies was established in 2007 to reduce greenhouse emissions and showcase US technology as well as increase US exports.This new testing service offering will be available separately or as a bundle with other UL lighting industry services such as Energy Star, performance testing and safety certification.
Zhaga is an industry-wide cooperation aimed at the development of standard specifications for the interfaces of led linear high bay light engines. The organization creates interface specifications for 'light engines' with the goal to promote interchangeability of light engines made by different manufacturers; different lighting applications need different light engines.
2015年10月8日星期四
which is the target of this legislation is more complicated to retrofit
It seems that government is focused on tackling the most powerful light sources rather than those that have viable or available alternatives. A 150W incandescent bulb is much more complicated to replace than a 40W bulb for example but government chose to phase out the higher power product led high bay light. With halogens, the GU10 equivalent may have been more a more sensible target, as these are prone to failure and can be easily switched out, the MR16 which is the target of this legislation is more complicated to retrofit.
There are two alternatives to the 12 V, 50 W, halogen MR16; compact fluorescents (CFLs) and LEDs. CFLs operate at between 12-14 W but as well as the issues around mercury release, also require the replacement of existing fittings due to their greater overall size. In contrast, LEDs can be directly retrofit into a halogen fitting and operate at a low 7W. LEDs also offer a considerable extended lifetime of up to 30,000 hours operation, compared to around 9,000 hours for CFLs or 2,500 for halogens.
The fact is, however, that LEDs are more expensive as an initial purchase. It would be a mistake to try to produce LED lamps that are at a similar price point to halogens because the two technologies represent fundamentally different approaches to lighting. Price matching LED lamps would only result in poor quality light output and premature failure, which in turn would mean low-levels of customer satisfaction and acceptance. Education is needed around these differences to avoid simple point-of-purchase price based decisions.
Yes, top end LEDs can now replace halogens, but are replaceable lamps really the way forward? Proper communication and education is needed around the overall value of product lifetime and reliability and this led linear high bay light requires a fundamental shift in thinking. It’s time to stop moving from one bulb to another in a drive to be more sustainable. We need to stand back and fundamentally re-think the way we light our buildings.
There are two alternatives to the 12 V, 50 W, halogen MR16; compact fluorescents (CFLs) and LEDs. CFLs operate at between 12-14 W but as well as the issues around mercury release, also require the replacement of existing fittings due to their greater overall size. In contrast, LEDs can be directly retrofit into a halogen fitting and operate at a low 7W. LEDs also offer a considerable extended lifetime of up to 30,000 hours operation, compared to around 9,000 hours for CFLs or 2,500 for halogens.
The fact is, however, that LEDs are more expensive as an initial purchase. It would be a mistake to try to produce LED lamps that are at a similar price point to halogens because the two technologies represent fundamentally different approaches to lighting. Price matching LED lamps would only result in poor quality light output and premature failure, which in turn would mean low-levels of customer satisfaction and acceptance. Education is needed around these differences to avoid simple point-of-purchase price based decisions.
Yes, top end LEDs can now replace halogens, but are replaceable lamps really the way forward? Proper communication and education is needed around the overall value of product lifetime and reliability and this led linear high bay light requires a fundamental shift in thinking. It’s time to stop moving from one bulb to another in a drive to be more sustainable. We need to stand back and fundamentally re-think the way we light our buildings.
2015年9月30日星期三
the number of sold retrofits is expected to treble within the next five years
The Parathom Classic A75 LED lamp offers customers energy savings of approximately 400 euros per lamp, when considering the entire service life. This lamp is the first LED-substitute for the 75W-light bulb available on the European market and can be used in standard E27-sockets. LED-retrofits – the name of which refers to the new source of light for the old socket – such as the Parathom Classic A75, offer simple access to LED technology for numerous customers. According to a study conducted by the management consulting firm McKinsey, the number of sold retrofits is expected to treble within the next five years and is anticipated to exceed the number of energy-saving lamps by the beginning of the next decade.
The rapid pace of the LED age implies a great challenge for manufacturers of luminaires: the large leaps in performance made in the field of light diodes, as well as the concomitant technical changes have led to the current situation in which virtually every new generation of LED products calls for an entirely new luminaire design. A solution to this situation is offered by standardised LED-modules. LED-modules are units of numerous jointly connected LED. So as to ensure that these are universally applicable, 170 companies in the lighting branch have already joined forces in the so-called “Zhaga Consortium”. The consortium defines certain interface specifications for LED-modules as well as the corresponding electronics required (the control gear). Together these form what is called the “LED-Light-Engine”. In the course of this, mechanical, thermal, photometric and electrical interfaces are taken into account. With these defined parameters, the Zhaga-certified Light-Engines form the counterpart to the standardised lamps of the traditional world of light, such as light bulbs or fluorescent lamps. Specified basic data facilitates planning certainty for the manufacturers of luminaires, providing them with more flexibility, as they are now able to focus on their core business: the actual development of luminaires.
OSRAM will be presenting the first Zhaga-certified light engine at Light+Building 2012: the round LED-module Prevaled Core Z2 for spot- and downlights, which is approximately ten times more efficient than an incandescent lamp and provides performance levels of up to 108 lm/W. What is more, the rod-like LED-modules Prevaled Linear and Prevaled Linear Slim will also be introduced for use in offices, in addition to application in industrial buildings. Their LED-points of light are positioned so close together that the source of light radiated is particularly uniform and evenly distributed.
The rapid pace of the LED age implies a great challenge for manufacturers of luminaires: the large leaps in performance made in the field of light diodes, as well as the concomitant technical changes have led to the current situation in which virtually every new generation of LED products calls for an entirely new luminaire design. A solution to this situation is offered by standardised LED-modules. LED-modules are units of numerous jointly connected LED. So as to ensure that these are universally applicable, 170 companies in the lighting branch have already joined forces in the so-called “Zhaga Consortium”. The consortium defines certain interface specifications for LED-modules as well as the corresponding electronics required (the control gear). Together these form what is called the “LED-Light-Engine”. In the course of this, mechanical, thermal, photometric and electrical interfaces are taken into account. With these defined parameters, the Zhaga-certified Light-Engines form the counterpart to the standardised lamps of the traditional world of light, such as light bulbs or fluorescent lamps. Specified basic data facilitates planning certainty for the manufacturers of luminaires, providing them with more flexibility, as they are now able to focus on their core business: the actual development of luminaires.
OSRAM will be presenting the first Zhaga-certified light engine at Light+Building 2012: the round LED-module Prevaled Core Z2 for spot- and downlights, which is approximately ten times more efficient than an incandescent lamp and provides performance levels of up to 108 lm/W. What is more, the rod-like LED-modules Prevaled Linear and Prevaled Linear Slim will also be introduced for use in offices, in addition to application in industrial buildings. Their LED-points of light are positioned so close together that the source of light radiated is particularly uniform and evenly distributed.
2015年9月28日星期一
this initiative will be widely appreciated by LED manufacturers
The leasing of MOCVD equipment in China is a relatively new concept, and we are confident that this initiative will be widely appreciated by LED manufacturers,” added Wolfgang Breme. “This cooperation, with one of Asia's largest and fastest growing leasing companies, is significant for us because it enhances our customers’ financial flexibility.”
“Aixtron’s role and commitment to China is to deliver the essential key-enabling technology, that the emerging LED lighting market needs, taking full advantage of Aixtron’s technology and embedded expertise,” Paul Hyland, President and Chief Executive Officer at Aixtron, commented. “Our joint goal with Minsheng is to facilitate the most appropriate financial instruments to support Chinese manufacturers as they strive to become global players in this exciting new market.”
As one of the world’s largest distributors of electronic components and embedded systems, Avnet Electronics Marketing’s team of illumination-focused light emitting diode (LED) and lighting engineers – or “illumineers” – assist customers around the globe in applications using LEDs in the illumination, signage, security, medical, industrial and transportation industries. Avnet’s regional LED/lighting design centers are equipped with industry-standard integrating spheres, spectroradiometers, goniophotometers, thermal imagers, and other key equipment– enabling Avnet’s LED team to perform relevant photometric, UV/IR radiometric and thermal measurements across a broad spectrum of products from individual LEDs up to complete luminaires.
“Aixtron’s role and commitment to China is to deliver the essential key-enabling technology, that the emerging LED lighting market needs, taking full advantage of Aixtron’s technology and embedded expertise,” Paul Hyland, President and Chief Executive Officer at Aixtron, commented. “Our joint goal with Minsheng is to facilitate the most appropriate financial instruments to support Chinese manufacturers as they strive to become global players in this exciting new market.”
As one of the world’s largest distributors of electronic components and embedded systems, Avnet Electronics Marketing’s team of illumination-focused light emitting diode (LED) and lighting engineers – or “illumineers” – assist customers around the globe in applications using LEDs in the illumination, signage, security, medical, industrial and transportation industries. Avnet’s regional LED/lighting design centers are equipped with industry-standard integrating spheres, spectroradiometers, goniophotometers, thermal imagers, and other key equipment– enabling Avnet’s LED team to perform relevant photometric, UV/IR radiometric and thermal measurements across a broad spectrum of products from individual LEDs up to complete luminaires.
2015年9月27日星期日
they can control from the other side of the world
What happens if you ask a normal family to boldly go where no-one has gone before - to live in the future? This five-part Channel 4 series, co-funded by one of the UK’s leading energy companies E.ON, and produced by Twofour, transforms the lives of a family, filling their home from top-to-bottom with futuristic technology and gadgets.
As well as having cutting-edge technology and gadgets to play with, the Perera family in Sheffield will be challenged by scenarios likely to come in the next twenty to fifty years.
Overseen by expert Chris Sanderson, the Pereras will discover how we may work, rest and play - as well as eat, travel, stay healthy and power our homes.
The series looks at the effects of working from home and living in multi-generational households and asks: what will we eat when cheap food is gone and mass-produced meat is unsustainable? And the family face being shamed by their bin if they don’t recycle enough and being temporarily banned from short car journeys (electric and hydrogen-powered, naturally).
But the future is not all bad news as the Pereras discover mind-controlled games, domestic power stations that slash their bills, robots they can control from the other side of the world, waterless washing machines, cars, lawnmowers and vacuums that drive themselves and the joys of growing your own fish supper.
As well as having cutting-edge technology and gadgets to play with, the Perera family in Sheffield will be challenged by scenarios likely to come in the next twenty to fifty years.
Overseen by expert Chris Sanderson, the Pereras will discover how we may work, rest and play - as well as eat, travel, stay healthy and power our homes.
The series looks at the effects of working from home and living in multi-generational households and asks: what will we eat when cheap food is gone and mass-produced meat is unsustainable? And the family face being shamed by their bin if they don’t recycle enough and being temporarily banned from short car journeys (electric and hydrogen-powered, naturally).
But the future is not all bad news as the Pereras discover mind-controlled games, domestic power stations that slash their bills, robots they can control from the other side of the world, waterless washing machines, cars, lawnmowers and vacuums that drive themselves and the joys of growing your own fish supper.
2015年9月25日星期五
The light output of a battery-powered LED is continuous
Taiwan Ministry of Economic Affairs (MOEA) has scheduled to focus eight rising industries including Chinese herbal medicine, telecommunications, electric vehicle, renewable energy, business services, LED lighting, metal materials, biotech and medical equipment, on the agenda in the regular talks on industrial cooperation with mainland China.
The new LED light bulb is smaller, and the shape of its globe (semispherical cover) is closer to a sphere. By employing an LED module (light source) having a chip-on-board (COB) structure, the light distribution angle realize 180°. What’s more, the new product, which is equivalent to a 25W MiniKrypton light bulb, is made by using Rohm's own light-diffusing material for its globe.
Recently, over 800 new Array Par 20 lamps and over 80 MR-16 HO lamps were installed as the first phase of a multi-phase relighting of a major Miami Beach hotel. Nexxus Lighting's Array? Lighting LED light bulbs utilize a patented design and proprietary Selective Heat Sink (SHS) Technology. Selective Heat Sink is an innovative and patented approach to thermal management which allows the lamps to achieve superior efficiency levels and an average life of more than 50,000 hours. Array lamps are fully dimmable on most standard incandescent dimmers and provide up to 80% energy savings compared to conventional incandescent and halogen bulbs.
Professional cameras use a xenon strobe light to produce a brief burst -- or flash -- of light, but the lighting on smartphone cameras is typically provided by an LED. The light output of a battery-powered LED is continuous, and much lower in intensity than a flash, leading to longer exposure times and darker, blurrier pictures.
The new LED light bulb is smaller, and the shape of its globe (semispherical cover) is closer to a sphere. By employing an LED module (light source) having a chip-on-board (COB) structure, the light distribution angle realize 180°. What’s more, the new product, which is equivalent to a 25W MiniKrypton light bulb, is made by using Rohm's own light-diffusing material for its globe.
Recently, over 800 new Array Par 20 lamps and over 80 MR-16 HO lamps were installed as the first phase of a multi-phase relighting of a major Miami Beach hotel. Nexxus Lighting's Array? Lighting LED light bulbs utilize a patented design and proprietary Selective Heat Sink (SHS) Technology. Selective Heat Sink is an innovative and patented approach to thermal management which allows the lamps to achieve superior efficiency levels and an average life of more than 50,000 hours. Array lamps are fully dimmable on most standard incandescent dimmers and provide up to 80% energy savings compared to conventional incandescent and halogen bulbs.
Professional cameras use a xenon strobe light to produce a brief burst -- or flash -- of light, but the lighting on smartphone cameras is typically provided by an LED. The light output of a battery-powered LED is continuous, and much lower in intensity than a flash, leading to longer exposure times and darker, blurrier pictures.
2015年9月24日星期四
the energy of the sun as effectively as possible means reduced electricity demand
René Penning de Vries, CTO at NXP Semiconductors, says: “We’re very proud to have developed this solution in collaboration with Philips Lighting. By making Solar Gen2 as power efficient as possible, we’ve produced something which is genuinely groundbreaking while remaining affordable in those countries that can benefit the most from it. Harnessing the energy of the sun as effectively as possible means reduced electricity demand and a more robust infrastructure.”
The key to the breakthrough lies in the combination of new High Brightness LEDs along with unique patented optics to create the most efficient and robust outdoor lighting system. On top of that, an intelligent charge controller, developed by NXP Semiconductors N.V., ensures the transfer of a maximum amount of power from the solar panels to the batteries. A smart way of charging and discharging maximizes battery life and light levels can be dimmed based on a self learning intelligence and a history log.A further benefit of the new solution is that it is future proofed by the inclusion of the Philips LEDGINE, which allows LED modules and drivers over time to be simply replaced and upgraded. In addition, Solar Gen2 includes theft prevention.
The SPIE Photonics West exhibition is the world’s leading venue for the photonics and laser industry and is a platform for presenting the latest developments and technologies in this sector. It is part of the SPIE Photonics West Conference and Exhibition, which is being held from January 21 to 26, 2012 in San Francisco, California. The organizer expects around 1,150 exhibitors and more than 19,000 visitors this year.
The key to the breakthrough lies in the combination of new High Brightness LEDs along with unique patented optics to create the most efficient and robust outdoor lighting system. On top of that, an intelligent charge controller, developed by NXP Semiconductors N.V., ensures the transfer of a maximum amount of power from the solar panels to the batteries. A smart way of charging and discharging maximizes battery life and light levels can be dimmed based on a self learning intelligence and a history log.A further benefit of the new solution is that it is future proofed by the inclusion of the Philips LEDGINE, which allows LED modules and drivers over time to be simply replaced and upgraded. In addition, Solar Gen2 includes theft prevention.
The SPIE Photonics West exhibition is the world’s leading venue for the photonics and laser industry and is a platform for presenting the latest developments and technologies in this sector. It is part of the SPIE Photonics West Conference and Exhibition, which is being held from January 21 to 26, 2012 in San Francisco, California. The organizer expects around 1,150 exhibitors and more than 19,000 visitors this year.
2015年9月23日星期三
In the event a fiber is removed from the illuminator during use
In addition, LED lights use 50-percent less power from the alternator – which in turn reduces the load on the engine. They can also last the lifetime of a vehicle.Enthusiasts can visit Audiusa.com to interact with LED-themed content and learn more about Audi’s signature technology throughout February. Besides, visitors to the Audi Forum in New York can explore an interactive LED-focused digital experience starts from January 29.
The new XLM Plus LED Fiber Optic Light Module with Electronics offers light output that is comparable to 180 W Xenon sources, yet with the advantages of LED lighting, which include long life, less heat output than Xenon, and virtually no ultraviolet or infrared radiation, which eliminates the need for filtering. The XLM Plus LED Light Module is compliant with medical safety standards IEC/EN 60601-1 and EN60601-1-2. The unit includes integrated electronic circuitry for safety alarms, error mode and power status indicators. It provides circuitry for connection to fiber safety interlocks. In the event a fiber is removed from the illuminator during use, the XLM Plus LED Fiber Optic Light Module can be immediately shut off, which is a unique safety feature for vision protection.
“Excelitas’ XLM Plus LED Fiber Optic Light Module with Electronics is an important addition to our growing portfolio of solid state lighting products that are specifically designed for integration into OEM medical device applications,” said Joel Falcone, senior vice president and general manager of Excelitas Technologies’ global lighting business. “Excelitas’ XLM Plus delivers brilliant, uniform light for endoscopy, surgical microscopy, and headlamp applications, allowing doctors to better perform diagnostic and therapeutic procedures, with all the advantages of state-of-the-art LED lighting,” Falcone added.
The new XLM Plus LED Fiber Optic Light Module with Electronics offers light output that is comparable to 180 W Xenon sources, yet with the advantages of LED lighting, which include long life, less heat output than Xenon, and virtually no ultraviolet or infrared radiation, which eliminates the need for filtering. The XLM Plus LED Light Module is compliant with medical safety standards IEC/EN 60601-1 and EN60601-1-2. The unit includes integrated electronic circuitry for safety alarms, error mode and power status indicators. It provides circuitry for connection to fiber safety interlocks. In the event a fiber is removed from the illuminator during use, the XLM Plus LED Fiber Optic Light Module can be immediately shut off, which is a unique safety feature for vision protection.
“Excelitas’ XLM Plus LED Fiber Optic Light Module with Electronics is an important addition to our growing portfolio of solid state lighting products that are specifically designed for integration into OEM medical device applications,” said Joel Falcone, senior vice president and general manager of Excelitas Technologies’ global lighting business. “Excelitas’ XLM Plus delivers brilliant, uniform light for endoscopy, surgical microscopy, and headlamp applications, allowing doctors to better perform diagnostic and therapeutic procedures, with all the advantages of state-of-the-art LED lighting,” Falcone added.
2015年9月21日星期一
his company is ready with a complete range of lighting products
The effective date of the merger was December 28, 2011. Financial details of the acquisition were not disclosed. Crystal IS will focus on R&D fundamentals and entrepreneurial business development management as well as continue to be based in New York State, while Asahi Kasei will concentrate on the product engineering and manufacturing side.
In the past year, the company has harvested NT$6.5 billion (US$216.6 million) revenue, better than the NT$5 billion (US$166 million) projected. In addition, the company had recently won an NT$800 million (US$26 million) contract to supply an American retailer LED lights this year. As a result, Wu is confident of the company’s 2012 goal, based on the company’s new products for lighting and backlight applications that will help drive operational growth.
Lighting products are predicted to bring the company NT$3 billion (US$100 million) in revenue this year. Its TV-backlight operation will increase marketing campaigns in China and South Korea, as well as being the contract supplier to the world’s top five TV brands.According to Wu ,the darkest days for LED industry has past, and the LED-lighting market will begin to take off this year worldwide and his company is ready with a complete range of lighting products.
In the past year, the company has harvested NT$6.5 billion (US$216.6 million) revenue, better than the NT$5 billion (US$166 million) projected. In addition, the company had recently won an NT$800 million (US$26 million) contract to supply an American retailer LED lights this year. As a result, Wu is confident of the company’s 2012 goal, based on the company’s new products for lighting and backlight applications that will help drive operational growth.
Lighting products are predicted to bring the company NT$3 billion (US$100 million) in revenue this year. Its TV-backlight operation will increase marketing campaigns in China and South Korea, as well as being the contract supplier to the world’s top five TV brands.According to Wu ,the darkest days for LED industry has past, and the LED-lighting market will begin to take off this year worldwide and his company is ready with a complete range of lighting products.
I am proud that Elemental LED played a part in the transformation
The LED lights on the green RV work in conjunction with two solar panels installed on the roof of the Airstream, and a battery with a monitor so Reinhardt and Daugherty can track their energy use.The interior of the RV is outfitted with dimmable LED strip lights and diffusers in the kitchen, dinette, bathroom and reading areas. LED puck lights on 12V dimmers create general area lighting throughout the interior of the RV.
Waterproof color-changing LED strip lights outfit the exterior of the RV, creating a dramatic glow on the Airstream’s metal finish during the evenings.Elemental LED teamed up with On the Green Road in 2010 when Reinhardt and Daugherty were beginning the Airstream retrofit. “It has been amazing to see an outdated 2003 Airstream gutted and transformed into a sustainable living space. It is definitely an eco-traveler’s dream and I am proud that Elemental LED played a part in the transformation,” says Elemental LED Marketing Manager Charlotte Dick.
RCA said at CES that it will manufacture LED bulbs as part of a larger home theater announcement. It developed a "chip on a board" led linear lighting that uses a single efficient LED light source, rather than several smaller ones. That design optimizes the energy efficiency of the bulb, said Bob Hatefi of RCA licensee BDC in a statement.
Dedicated lighting companies are also going to be at CES. For Switch Lighting , it will be showing off its line of LED bulbs.
Waterproof color-changing LED strip lights outfit the exterior of the RV, creating a dramatic glow on the Airstream’s metal finish during the evenings.Elemental LED teamed up with On the Green Road in 2010 when Reinhardt and Daugherty were beginning the Airstream retrofit. “It has been amazing to see an outdated 2003 Airstream gutted and transformed into a sustainable living space. It is definitely an eco-traveler’s dream and I am proud that Elemental LED played a part in the transformation,” says Elemental LED Marketing Manager Charlotte Dick.
RCA said at CES that it will manufacture LED bulbs as part of a larger home theater announcement. It developed a "chip on a board" led linear lighting that uses a single efficient LED light source, rather than several smaller ones. That design optimizes the energy efficiency of the bulb, said Bob Hatefi of RCA licensee BDC in a statement.
Dedicated lighting companies are also going to be at CES. For Switch Lighting , it will be showing off its line of LED bulbs.
2015年9月18日星期五
LED lighting as a package to owners of homes
According to an October survey of 303 adults conducted for lighting company Osram Sylvania, there are still a third of Americans, who say they prefer traditional bulbs. One in eight, or 13%, say they'll stockpile Edison's 100-watt led high bay light.Maybe for American, Edison's 100-watt bulbs are too impressive to phase out immediately, but it’s tendency, so let’s wait and see what happens in New Year.
According to the company, the major electronics maker's business fields as of Sunday are now divided into three groups — consumer, components and devices, and solutions — after it restructured five segments. Its 16 divisions were consolidated into nine, including appliances, energy and health care, under the three business fields.
The move is aimed at expanding Panasonic's energy-solutions business by selling energy-saving products such as solar batteries and LED lighting as a package to owners of homes, retail shops and buildings, an operation the company is trying to establish as one of its group pillars amid slumping television sales.By building on the strengths of Sanyo's energy business and Panasonic Electric's housing-equipment operations, the company aims to grow its "comprehensive solutions" business into a ￥1 trillion revenue source by 2018.
Huga Optotech ended unpaid furlough practice when New Year comes, signaling that Taiwan’s LED industry is getting out of its worst days. Its Taiwan’s only publicly held LED maker to have its employees take unpaid leaves in October, 2011, to cope with slumping market for backlights. Huga Optotech’s president, C.N. Huang, pointed out that the firm decided to end the practice in late December in anticipation that market would pick up in March 2012.
According to the company, the major electronics maker's business fields as of Sunday are now divided into three groups — consumer, components and devices, and solutions — after it restructured five segments. Its 16 divisions were consolidated into nine, including appliances, energy and health care, under the three business fields.
The move is aimed at expanding Panasonic's energy-solutions business by selling energy-saving products such as solar batteries and LED lighting as a package to owners of homes, retail shops and buildings, an operation the company is trying to establish as one of its group pillars amid slumping television sales.By building on the strengths of Sanyo's energy business and Panasonic Electric's housing-equipment operations, the company aims to grow its "comprehensive solutions" business into a ￥1 trillion revenue source by 2018.
Huga Optotech ended unpaid furlough practice when New Year comes, signaling that Taiwan’s LED industry is getting out of its worst days. Its Taiwan’s only publicly held LED maker to have its employees take unpaid leaves in October, 2011, to cope with slumping market for backlights. Huga Optotech’s president, C.N. Huang, pointed out that the firm decided to end the practice in late December in anticipation that market would pick up in March 2012.
2015年9月15日星期二
the space with a stitched screen
whose work includes renovations of historic Art Deco buildings, high-end homes in Palm Beach, Mexico, Paris and Morocco – was inspired by the horizontal configuration of the covered terrace and the trajectory of a massive roof drain on the ceiling. Rather than conceal these elements, he decided to honor them by hanging a LED-lit macramé wall along the drain’s trajectory to help shield the led high bay light from the wind blowing in from the terrace, while at the same time enclosing and defining the space with a stitched screen. However, Wall’s search for concealed LED lighting that could rest on top of the drain, highlighting the macramé wall from the top and bottom, proved to be a challenge…until he discovered CSL’s energy-efficient product line.
“The scale and the form of CSL’s lighting worked well to offset the cubic nature of the space,” said Wall.
CSL’s sponsorship of the 2011 ELLE DéCOR Showhouse comes at an important time for the lighting manufacturer, which launched an award-winning LED Eco-Downlight collection in 2011 and has plans to expand the line in 2012.Like many designers, James came to us with very specific program requirements,” said Steve Nadell, president of Troy-CSL. “It gives us a lot of satisfaction to know that CSL is the go-to source for precision-engineered, high-performance LED lighting. We hope our presence at the ELLE DéCOR Showhouse gives concealed LED lighting more exposure, which has often been overlooked in concept home circuits due to its hidden nature.”
ELLE DéCOR will unveil the 2011 Showhouse as an official satellite exhibit of Design Miami/ during Art Basel beginning Saturday, Dec. 3 and continuing until Dec. 19. A group of 10 notable designers hand-selected by ELLE DéCOR’s editorial team has transformed a blank nearly 9,000 square-foot penthouse space located on Paramount Bay’s 43rd floor. Admission tickets are $25 and benefit Miami’s Design and Architecture Senior High (DASH). Visit elledecor.com/showhouse for tickets. Exclusive coverage of the concept house will be published in ELLE DéCOR’s April 2012 issue.
“The scale and the form of CSL’s lighting worked well to offset the cubic nature of the space,” said Wall.
CSL’s sponsorship of the 2011 ELLE DéCOR Showhouse comes at an important time for the lighting manufacturer, which launched an award-winning LED Eco-Downlight collection in 2011 and has plans to expand the line in 2012.Like many designers, James came to us with very specific program requirements,” said Steve Nadell, president of Troy-CSL. “It gives us a lot of satisfaction to know that CSL is the go-to source for precision-engineered, high-performance LED lighting. We hope our presence at the ELLE DéCOR Showhouse gives concealed LED lighting more exposure, which has often been overlooked in concept home circuits due to its hidden nature.”
ELLE DéCOR will unveil the 2011 Showhouse as an official satellite exhibit of Design Miami/ during Art Basel beginning Saturday, Dec. 3 and continuing until Dec. 19. A group of 10 notable designers hand-selected by ELLE DéCOR’s editorial team has transformed a blank nearly 9,000 square-foot penthouse space located on Paramount Bay’s 43rd floor. Admission tickets are $25 and benefit Miami’s Design and Architecture Senior High (DASH). Visit elledecor.com/showhouse for tickets. Exclusive coverage of the concept house will be published in ELLE DéCOR’s April 2012 issue.
2015年9月14日星期一
LED display panel implementations for indoor applications
Currently, 20 business groups have signed a voluntary energy conservation agreement, with the goal of decreasing energy led high bay light consumption by 5 percent, or 14 million kilowatt-hours, over a three-year period until 2013.
The device can drive up to 128 RGB (Red-Green-Blue) LED pixels resulting in a drastic component count reduction. The fine pitch technology also pioneers the use of “Common Cathode” RGB LED topology which results in up to 30% reduction in power dissipation and overcomes the overheating issue.
Other innovations include ghost image elimination, true 16-bit color, drastic reduction of EMI (Electromagnetic Interference) emissions and scan refresh rates of up to 16 KHz. SiliconCore Technology has patents pending in both the US and China on the key technologies developed for the fine pitch panel.
The technology is perfectly suited for full HD LED display panel implementations for indoor applications such as broadcasting, retail displays, casinos, banking, foyer, medical and public events.
The device can drive up to 128 RGB (Red-Green-Blue) LED pixels resulting in a drastic component count reduction. The fine pitch technology also pioneers the use of “Common Cathode” RGB LED topology which results in up to 30% reduction in power dissipation and overcomes the overheating issue.
Other innovations include ghost image elimination, true 16-bit color, drastic reduction of EMI (Electromagnetic Interference) emissions and scan refresh rates of up to 16 KHz. SiliconCore Technology has patents pending in both the US and China on the key technologies developed for the fine pitch panel.
The technology is perfectly suited for full HD LED display panel implementations for indoor applications such as broadcasting, retail displays, casinos, banking, foyer, medical and public events.
2015年9月11日星期五
the night view of the city and improve the quality of life for the residents
At the same time, the Koffer2 solution reduces Zürich’s energy requirements from 32 kW to 21 kW (annual savings of 42,800 kWh), while the led high bay light require 25 kW for 1,654 hours a year (41,000 kWh/year). Other significant benefits include reduced servicing requirements and the long lifespan of the lights.
The 40-year old bridge in the heart of Switzerland’s biggest city is the main connection between the north and the south, as well as providing connections to other parts of the country.. For the approximately 70,000 vehicles travelling across the bridge every day, security and functionality are of the utmost importance.
Together with the required renovation of the bridge, the municipality of Zürich chose to renew its lighting with the intention of reducing energy costs, service costs and light pollution. Additionally, Zürich wanted to shape the night view of the city and improve the quality of life for the residents.
More than 30 representatives from lighting industry leading manufacturers and lighting design firms have consisted of a committee to judge the impartial judging process. The Committee evaluates each submission on its uniqueness, innovation, and significance in the lighting industry. Lusio was one of about 150 products recognized from submissions that included products and manufacturers from all categories of the lighting industry.
The 40-year old bridge in the heart of Switzerland’s biggest city is the main connection between the north and the south, as well as providing connections to other parts of the country.. For the approximately 70,000 vehicles travelling across the bridge every day, security and functionality are of the utmost importance.
Together with the required renovation of the bridge, the municipality of Zürich chose to renew its lighting with the intention of reducing energy costs, service costs and light pollution. Additionally, Zürich wanted to shape the night view of the city and improve the quality of life for the residents.
More than 30 representatives from lighting industry leading manufacturers and lighting design firms have consisted of a committee to judge the impartial judging process. The Committee evaluates each submission on its uniqueness, innovation, and significance in the lighting industry. Lusio was one of about 150 products recognized from submissions that included products and manufacturers from all categories of the lighting industry.
2015年9月10日星期四
effective control of lighting energy consumption is critical in gaining LED certification
The LEED rating system is based on accepted energy and environmental principles and strikes a balance between known, established practices and emerging concepts,” Mocherniak noted. “led high bay light is the single largest energy consumer in commercial buildings, and effective control of lighting energy consumption is critical in gaining LED certification. Clearly, addressable dimming controls can be an indispensable tool in achieving this goal.”
According to the research, the secret to controlled growth of the five-period indium GaN/GaN (InGaN/GaN) multiple quantum wells that comprise the emissive layer in the pyramidal-shaped LED array is a thin-film titanium pre-orienting layer that is similar to the GaN hexagonal crystal structure.
Following the pre-orienting layer and the initial low-temperature GaN layer (LT-GaN) is a hole-patterned silicon dioxide (SiO2) layer that further defines the nucleation sites for the emissive-layer growth stages using a local heteroepitaxy process.
According to Samsung’s statement, due to that the sales went up 14% in November from 5 million units in October, the company is certain to secure the number 1 spot for all of 2011. Also, the company said in the statement that it was optimistic about the prospects of meeting its 2011 flat-screen TV sales target of 45 million units.
According to the research, the secret to controlled growth of the five-period indium GaN/GaN (InGaN/GaN) multiple quantum wells that comprise the emissive layer in the pyramidal-shaped LED array is a thin-film titanium pre-orienting layer that is similar to the GaN hexagonal crystal structure.
Following the pre-orienting layer and the initial low-temperature GaN layer (LT-GaN) is a hole-patterned silicon dioxide (SiO2) layer that further defines the nucleation sites for the emissive-layer growth stages using a local heteroepitaxy process.
According to Samsung’s statement, due to that the sales went up 14% in November from 5 million units in October, the company is certain to secure the number 1 spot for all of 2011. Also, the company said in the statement that it was optimistic about the prospects of meeting its 2011 flat-screen TV sales target of 45 million units.
2015年9月8日星期二
the growing worldwide LED fixtures market
Located in the historic Leathermarket, a short walk from London Bridge, the office will provide full sales, technical and application support for countries in Europe, the Middle East and Asia-Pacific regions. The opening of the led high bay light London office is a demonstration of the Lumenpulse commitment to serving new and existing customers around the world, and is a further step towards addressing the growing worldwide LED fixtures market, which is estimated to reach $9 billion by 2014 according to market analysts Strategies Unlimited.
The office will be headed up by Gorm Teichert, Lumenpulse Executive Vice President International Sales and a lighting and LED industry veteran of over 20 years.
“Choosing to locate our EMEA Sales Headquarters in London was a strategic decision,” said Teichert. “As well as being an international transport hub, London is a major center for the architectural and lighting design community. We’re now in the perfect position to be able to offer close support to UK based specifiers and our international customer base.”
The office will be headed up by Gorm Teichert, Lumenpulse Executive Vice President International Sales and a lighting and LED industry veteran of over 20 years.
“Choosing to locate our EMEA Sales Headquarters in London was a strategic decision,” said Teichert. “As well as being an international transport hub, London is a major center for the architectural and lighting design community. We’re now in the perfect position to be able to offer close support to UK based specifiers and our international customer base.”
the electronic driver selection process for new lamp and luminaire product development
a leading developer and manufacturer of LED lighting technologies and solutions, announced commercial availability of its latest generation of industry-leading LS, ES, and award-winning RS product families, delivering an increase in efficacy of up to 30% and a reduction of up to 30% in cost per lumen compared to previous product generations. Featuring the largest portfolio of LED arrays in the lighting industry, Bridgelux offers products for lighting applications ranging from the light output equivalent of a 20-Watt decorative lamp to that of a 300-Watt high intensity discharge (HID) city streetlight.
Bridgelux’s latest generation of LED arrays offer optical and mechanical compatibility with previous product generations, allowing customers to easily incorporate all performance enhancements with a simple upgrade path, minimizing design efforts. Further, these new arrays offer greater system design flexibility to achieve Energy Star, Title 24, Part L and other global energy efficiency standards. All Bridgelux arrays are configured to align with industry standard drive currents to simplify the electronic driver selection process for new lamp and luminaire product development, enabling accelerated time to market.
“Bridgelux’s commitment to rapid technology innovation while maintaining the product design characteristics of their led high bay light dramatically reduces our development risk, and ensures an easy design-in process,” said Jeff Spencer, director of product management - commercial for Juno Lighting Group by Schneider Electric. “We are very excited to be using their latest generation of arrays in the new Indy Performance Series LED downlights that we are launching later this month. As LED technology continues to rapidly evolve, Bridgelux has been a terrific strategic partner because they understand that by providing platform stability with the LED array products we can easily adopt the latest technology improvements and rapidly pass these innovations on to our customers without significant product redesigns.”
Bridgelux’s latest generation of LED arrays offer optical and mechanical compatibility with previous product generations, allowing customers to easily incorporate all performance enhancements with a simple upgrade path, minimizing design efforts. Further, these new arrays offer greater system design flexibility to achieve Energy Star, Title 24, Part L and other global energy efficiency standards. All Bridgelux arrays are configured to align with industry standard drive currents to simplify the electronic driver selection process for new lamp and luminaire product development, enabling accelerated time to market.
“Bridgelux’s commitment to rapid technology innovation while maintaining the product design characteristics of their led high bay light dramatically reduces our development risk, and ensures an easy design-in process,” said Jeff Spencer, director of product management - commercial for Juno Lighting Group by Schneider Electric. “We are very excited to be using their latest generation of arrays in the new Indy Performance Series LED downlights that we are launching later this month. As LED technology continues to rapidly evolve, Bridgelux has been a terrific strategic partner because they understand that by providing platform stability with the LED array products we can easily adopt the latest technology improvements and rapidly pass these innovations on to our customers without significant product redesigns.”
2015年9月2日星期三
reached an agreement to develop horticultural factory technologies
It’s noted that Philips and Osram have also ventured into the emerging market. In the first quarter of 2011, Everlight and some 10 manufacturers including Philips reached an agreement to develop horticultural factory technologies, including plant-grow lights, plant nutrition liquid,led high bay light and environmental humidity control.
Recently, Formosa Epitaxy Inc. (FOREPI) is reported to regained Samsung’s contracts for LED chips used in TV backlights since October, and the South Korean company will gradually move the contracts originally placed with Epistar Inc. back to FOREPI over the next three years.Both Epistar and FOREPI have declined to comment. However, FOREPI executives said that the company has landed more contracts in November than October from South Korean buyers by an unexpectedly high margin.
FOREPI used to be Samsung’s major supplier of blue chips many years ago. But Samsung had ended business with led linear high bay light in no time and shifted contracts to Epistar, when FOREPI entered into alliance with LG.Currently, simultaneously contracted by Samsung and LG, FOREPI is estimated to be the primary beneficiary in Taiwan of South Korea’s LED contracts.
Recently, Formosa Epitaxy Inc. (FOREPI) is reported to regained Samsung’s contracts for LED chips used in TV backlights since October, and the South Korean company will gradually move the contracts originally placed with Epistar Inc. back to FOREPI over the next three years.Both Epistar and FOREPI have declined to comment. However, FOREPI executives said that the company has landed more contracts in November than October from South Korean buyers by an unexpectedly high margin.
FOREPI used to be Samsung’s major supplier of blue chips many years ago. But Samsung had ended business with led linear high bay light in no time and shifted contracts to Epistar, when FOREPI entered into alliance with LG.Currently, simultaneously contracted by Samsung and LG, FOREPI is estimated to be the primary beneficiary in Taiwan of South Korea’s LED contracts.
2015年9月1日星期二
This has been one of the most impressive projects I have completed in my career
After measuring fixture performance, calculating project savings and payback and soliciting opinions from facility stakeholders and the general public, the City of Austin determined that the Cooper LED luminaire best met the needs for the City Hall Parking Garage," says James Parker, Project Manager, City of Austin. "We were impressed by Cooper's reputation as a manufacturer and their ability to meet tight project delivery schedules. After installing the Cooper Lighting LED fixtures, we are realizing a significant reduction in energy usage and savings in energy costs while dramatically improving the quality and quantity of led high bay light. This response by the citizens of Austin has been overwhelmingly enthusiastic and positive. We are literally saving the amount of electricity equivalent to the power used by 48 average homes in Austin each year. This has been one of the most impressive projects I have completed in my career."
The McGraw-Edison Concise LED Luminaires feature patent-pending, modular LED LightBAR? technology, which delivers uniform illumination to improve vehicular movement and pedestrian safety. The LED fixtures offer energy savings from 30-75% over standard H.I.D sources found in many applications today. The one-piece, die-cast aluminum rugged housing features heavy wall construction for superior heat transfer and reliable operation in -30 degrees C to 40 degrees C ambient conditions.
"Cooper Lighting is always proud to know that we are helping cities and residents reach their energy reduction goals, saving thousands of dollars each year," said Mark Eubanks, President, Cooper Lighting. "It is exciting to see so many cities across the country taking advantage of the benefits that led linear high bay light technology can offer, and we are continuing to develop products and technologies to keep up with the pace of these project needs and goals. We are pleased that the City of Austin chose our product and that they are seeing the results they anticipated."
The McGraw-Edison Concise LED Luminaires feature patent-pending, modular LED LightBAR? technology, which delivers uniform illumination to improve vehicular movement and pedestrian safety. The LED fixtures offer energy savings from 30-75% over standard H.I.D sources found in many applications today. The one-piece, die-cast aluminum rugged housing features heavy wall construction for superior heat transfer and reliable operation in -30 degrees C to 40 degrees C ambient conditions.
"Cooper Lighting is always proud to know that we are helping cities and residents reach their energy reduction goals, saving thousands of dollars each year," said Mark Eubanks, President, Cooper Lighting. "It is exciting to see so many cities across the country taking advantage of the benefits that led linear high bay light technology can offer, and we are continuing to develop products and technologies to keep up with the pace of these project needs and goals. We are pleased that the City of Austin chose our product and that they are seeing the results they anticipated."
2015年8月31日星期一
the project will see a return on their investment in six years
Last year New Glasgow converted 59 of its street lights in a trial and found they produced a higher level of lighting. Once converted, the led high bay light change is expected to reduce energy consumption by 287 tonnes of carbon dioxide per year.
While New Glasgow proceeds with its conversion to LED lighting, other municipalities are still researching their options.
Westville CAO Scott Fraser said a study was conducted last year to see if it is cost-effective to have the lights converted and found that LED lighting would save the town money. Trenton, Pictou and the municipality of Pictou are all looking at conversion plans.
New Glasgow has close to 1,200 street lights to convert. They have contracted G.J. Cahill and Company to install the lights. The project will cost approximately $820,000 with the town receiving $120,000 from Efficiency Nova Scotia. MacDonald said the project will see a return on their investment in six years.
Malaysian company MyLED Group, which consists of led linear high bay light Master and MyLED Opto Technology, has injected $54.90 million to expand its manufacturing capability in solid state lighting and LED industry.
While New Glasgow proceeds with its conversion to LED lighting, other municipalities are still researching their options.
Westville CAO Scott Fraser said a study was conducted last year to see if it is cost-effective to have the lights converted and found that LED lighting would save the town money. Trenton, Pictou and the municipality of Pictou are all looking at conversion plans.
New Glasgow has close to 1,200 street lights to convert. They have contracted G.J. Cahill and Company to install the lights. The project will cost approximately $820,000 with the town receiving $120,000 from Efficiency Nova Scotia. MacDonald said the project will see a return on their investment in six years.
Malaysian company MyLED Group, which consists of led linear high bay light Master and MyLED Opto Technology, has injected $54.90 million to expand its manufacturing capability in solid state lighting and LED industry.
订阅：
博文 (Atom)